Water Gun for instrument
2Pages

W ater gun W G N-R2(2M ) Applications 〇Pr imar y cleaning of sur gery-assisted r obotic instr um ents 〇Cleaning of medical devices w ith inner cavity 〇Pr imar y cleaning of small steel pr oducts Featur es 〇ON/ OFF oper ation by index finger easily 〇E asy gr ip 〇Don't need the opening and closing of water faucets 〇Only used polypr opylene and fluoror ubber in w etted par ts 〇Ther e are no elution of r ust and oil 　 Replacement nozzle for instruments Operating temperature range M aximum operating pressure Operating fluid Specifications W ater (not use for hot water, gas and solvent) W ater gun (with shower nozzle) Two nozzles for instruments included Blade hose fitting (gun side) Blade hose (I.D. 8mm x O.D. 13.5mm x length 2m) M ethod of application 1.Connecting the water gun to the flashpor t of the instr ument 2.Come out water by pr ess the lever with your index finger 3.Stop water when the index finger is r eleased Flash por t ① Cleaning the inside of the tube in the shaft (black bar ) Flash por t ② Cleaning the in

W ater gun Cleaning Hose and W ater gun were inserted into the flush port of the instrument to compare the water flow rate. （g/ seconds. ） 20 Cleaning hose H ow to com par e the flow r ate W GN : port A CH : port A Connect the flush hose and water gun W GN-R2(2M to flush ports 1 and 2 on da Vinci X i instrument and measure the flush flow rate (g/ seconds). Since the recommended 20 cleaning water pressure of the instrument is 32psi(0.23M pa, the dynamic water pressure of the cleaning water (tap water) is used as 0.05/ 0.10/ 0.15/ 0.20M Pa, and the flow rate (g) for 20 seconds is measured....