eLM113
14Pages

KOKEN Breastfeeding Simulation Set LM-113A KOKEN Postpartum Breast Care Model LM-113 Latch on mask for KOKEN Baby LM-113B Instruction Manual Thank you for purchasing our products. Please read this instruction manual carefully to ensure the correct use of the products, and store it in a safe place for easy access. KOKEN CO., LTD. 1-4-14 Koraku, Bunkyo-ku, Tokyo 112-0004 JAPAN URL:http://www.kokenmpc.co.jp E-mail:customer@kokenmpc.co.jp © 2017 KOKEN CO.,LTD. C-1-1031-1-01-00

Handling and Safety Precautions These precautions must be observed strictly to ensure safe long-term use of the product. The following precautions should be strictly observed: 1. This model is made of special materials with texture similar to human skin. The model must be handled carefully in the same manner as handling an actual person. The model may be damaged when pulled with force or used in contact with sharp objects. 2. Do not place any objects directly on the model, and do not place the model breast skin-side down. The model may become deformed. 3. If the skin becomes sticky or after...

1. Outline and Features 2. Names of Parts and Structure 3. Handling Instructions KOKEN Postpartum Breast Care Model 4. Handling Instructions Latch on mask for KOKEN Baby 5. Instructions for Care 6. Specifications

1. Outline and Features Outline KOKEN Breastfeeding Simulation Set, KOKEN Postpartum Breast Care Model, and Latch on mask for KOKEN Baby are the optimum educational tools for the training of breastfeeding support and breast care. Features 1. Appearance and texture that are close to human skin are achieved by using special silicone rubber as a material. 2. Users can feel adequate close fit when wearing the model and can take a natural breastfeeding position. 3. By attaching Latch on mask for KOKEN Baby on your KOKEN Baby, users can practice the support for an appropriate latch of babies and...

2. Names of Parts and Structure KOKEN Postpartum Breast Care Model Baby powder Breast bag (right and left) Protective board Instruction manual (this brochure)

Latch on mask for KOKEN Baby Latch on mask for KOKEN Baby Instruction manual (this brochure) KOKEN Breastfeeding Simulation Set The set consists of KOKEN Postpartum Breast Care Model and Latch on mask for KOKEN Baby.

3. Handling Instructions KOKEN Postpartum Breast Care Model 3-1 How to wear 1. Fit the chest part of the model to the chest of the wearer, and then fasten the shoulder belts. 2. Fasten the back belt. Back belt * When the back belt is loose (for instance, when the wearer is thin), fasten the supplementary hook and loop fastener. Supplementary hook and loop fastener 3. If the harness becomes loose, fasten again so that the model fits the body closely.

3-2 Adjustment of engorgement of breast The hardness and shape of breasts can be adjusted by inflating and deflating the breast bags. 1. Attach the connector of the air pump to the two-way cock. Connect the lure lock to the connecting port of the two-way cock. 2. Turn the handle of the two-way cock to open; close the valve of the air pump and inject the air. Close * To reduce the volume of the air, loosen the valve of the air pump to let the air out. Normal condition * Press the air pump for about 8 to 10 times, or 15 times at the maximum. * Be careful, as the bag may be damaged when it is...

3. After completing the adjustment of air, turn the handle of the two-way cock to close and remove the connector of the air pump. 4. Secure the air tube with the hook and loop fastener under the arm so that the tube does not get in the way. Hook and loop fastener for securing the air tube * To change the hardness, deflate the bag once and then inflate it again. * After finishing the practice, turn the handle of the two-way cock to open and deflate the bags.

3-3 Attaching and removing breast bags When applying baby powder inside the breast skin or washing the model, remove the breast bags. How to remove 1. Remove the protective board and lift the flap of the harness. * Do not discard the protective board by mistake. 2. Slowly remove the breast bags from the opening on the backing sheet. * Do not pull with force or hook with sharp objects. The model may be damaged. Breast bags can be removed easily by starting from the lower edge while enlarging the opening of the backing sheet. Backing sheet

How to attach 1. Lift the flap of the harness, and then slowly push the breast bags into the harness from the opening in the center of the backing sheet. Breast bags can be placed easily in the harness by starting from the upper edge while enlarging the opening of the backing sheet. 2. Position the air tubes so that they come out downward. 3. Put the protective board back. 4. Confirm the position of the breast bags by looking at the model from the breast skin-side and adjust the bags so that they look natural. disappear when the model is worn.

4. Handling Instructions Latch on mask for KOKEN Baby 4-1 How to attach 1. Cover the face of KOKEN baby with Latch on mask for KOKEN Baby starting from the jaw. The ears of the mask do not reach the ears of KOKEN Baby. *If the mask is sticky and hard to attach, apply baby powder inside the mask and the head of KOKEN Baby. 2. Fasten the hook and loop fastener on the back of the head. 4-2 How to use By using it with KOKEN Postpartum Breast Care Model, users can practice the appropriate support for breastfeeding or an appropriate latch.

5. Instructions for Care ・ Clean the skin of the products by wiping the surface with neutral detergent or alcohol pads. After drying, apply the powder. * Do not use solvents, such as thinners and benzin. ・ Clean the cloth parts by gently patting them with a piece of cloth dampened with neutral detergent, and wring out. ・ When the cloth parts are heavily soiled, remove the breast bags and the protective board; hand-wash the rest by gently pressing with regular washing detergent in lukewarm water (up to 30° C). * Handle the breast skin part as gently as possible in the same way you handle...