1
1 / 4Pages

The Best FMD for Zone IV Protection The Latest Advancement in Ferromagnetic Detection for MRI Safety FerrAlert™ Patented Technology provides the most precise, reliable detection and prevention of ferromagnetic threats from entering Zone IV. FerrAlert™ detectors are recognized to be the most accurate ferromagnetic detectors for MRI due to their exclusive location-specificity feature. FerrAlert™ detectors have been independently tested to be the most sensitive in real-world MRI environments. FerrAlert™ Unique Features: NEW - INTELLIGENT VISUAL ADVANCED WARNING alerts on the approach of ferromagnetic threats to Zone IV, well before the portal is reached. The greater the threat, the further away the pre-warning is activated. The audio alarm is activated only at the threshold if the advanced visual warning was ignored. Ferrous objects not approaching the entrance to Zone IV do not trigger an audible warning. (A ferrous object is not a threat until it tries to enter the Magnet Room) INSTANTLY PINPOINTS LOCATION OF FERROMAGNETIC OBJECT, allowing the Technologist to quickly and easily identify the location of all ferromagnetic threats - NO invasive pat-down or handheld detectors required. ESCALATING ALARM STATUS IS ALWAYS VISIBLE from both inside and outside the MRI room, allowing the Technologist full control of the room at all times. Control of access into Zone IV is required by the ACR and The Joint Commission, as well as other MRI Safety organizations. Visual Advanced Warning activated as ferrous objects approaches the portal With Enhanced Sensitivity and new Visual Advanced Warning Technology, FerrAlert™ HALO II will bring our customers an unparalleled ease of use and satisfaction. PATENTED TECHNOLOGY SUPPRESSES FALSE WARNINGS while providing the HIGHEST SENSITIVITY to ferromagnetic threats. This technological advancement reduces alarm fatigue and increases throughput. The use of 24 sensors ensures uniform sensitivity and detection reliability from head to toe, left and right. DESIGNED AND MANUFACTURED IN THE USA

EASILY UNDERSTOOD STATUS INDICATORS GREEN – Go YELLOW – Warning RED – STOP! ! The GREEN LED HALO array illuminated around the MRI entrance indicates that the detector is scanning and there are no ferromagnetic threats detected. ! A YELLOW beacon light indicates that a threat is approaching the portal. ! The RED LED HALO array flashes the entire portal, indicating a major threat such as a ventilator or oxygen cylinder approach the portal. The greater the threat, the further away the warning is activated. Ferrous objects not approaching the entrance to Zone IV do not trigger an audible...

Only FerrAlert™ has intelligent advanced warning prior to entry Only FerrAlert™ pinpoints the location of projectile threats Only FerrAlert™ is viewable from both inside and outside the MRI room FerrAlert™ HALO II shown alarming and locating a ferromagnetic object being carried by patient about to enter the Magnet Room. Location LEDs on either side of door opening pinpoint threat. ACR and The Joint Commission require control of Zone IV at all times! Unlike other detectors, ONLY FerrAlert™ allows the Technologist to have full control of the MRI room when working inside and can quickly...

FerrAlert™ Additional Features: CONTINUOUS MAGNETIC DISTURBANCE MONITORING provides instant feedback by 2 highly visible integrated bar graphs MOST FLEXIBLE INSTALLATION for all facility architectural layouts. Mounts unobtrusively with both in-swing and out-swing doors ALARM INDICATOR LIGHTS NOT BLOCKED BY AN OUTWARD SWINGING DOOR SAFE, PASSIVE DETECTION no electromagnetic radiation, RF radiation, or magnetic field ADJUSTABLE SENSITIVITY AND AUDIO ALARM LEVELS CONFORMS TO ALL APPLICABLE RECOMMENDATIONS AND STANDARDS including FDA, ACR, AAMI, Joint Commission, FGI and VA 18 DETECTION ZONES...