ECOTROC® ATM Medical compressed air
4Pages

ECOTROC® ATM Adsorption Dryers for Medical Compressed Air

Management System Medical breathing air - reliably purificateci The ECOTROC® ATM product line has been specially developed for the conversion of compressed air into medical air. Compressed air intended for use as breathing air is subject to particularly strict requirements concerning air quality and failure safety. Use of the ECOTROC® ATM purification systems guarantees compliance with the internationally applied limits and current standards (e.g. Your Safety KSI Filtertechnik is certified compliant with DIN EN ideal partner if you are looking for a medical device manufacturer able to...

Standard package Composition of an ECOTROC® ATM purification unit: MFO/SMA prefilter combination (1 micron/o.oi micron) ATK heatless-type adsorption dryer, fully automatic, with special adsorbent combination Electronic control system including compressor synchroni zing circuit CA activated carbon filter SMA final filter (0,01 micron) Contaminated compressed air high in humidity and oil fractions is first fed into the prefilter combinati- on. Here, the compressed air is cleaned of particles and condensate. Then, in the downstream adsorpti- on dryer, the water vapour concentration is reduced...

ECOTROC® ATM Medical air purication Type Capacity m3/h Connection Width in mm Depth in mm Height in mm ATM-AL 1 6 ¼“ 720 205 550 ATM-AL 2 12 ¼“ 720 205 685 ATM-AL 3 24 D/ i“ 750 205 895 ATM-AL 4 42 D/ i“ 750 215 1155 ATM-AL 6 60 -“ 885 215 1218 ATM-AL 8 84 -“ 885 215 1360 ATM-AL 9 108 -“ 1005 260 1360 ATM 15 180 1“ 1100 664 1106 ATM 18 216 1“ 1100 664 1266 ATM 22 252 1“ 1154 664 1382 ATM 34 408 1 -“ 1154 729 1652 ATM 45 576 1 -“ 1527 729 2011 ATM 55 720 1 -“ 1980 875 1800 *based on 1 bar (abs) and 20°C with 9 bar g and 35°C inlet temperature Medium: compressed air Pressure dewpoint: -28°C...