Membrane Dryer Solution-Oriented Compressed Air Drying

ECOTROC® MT Reliable Compressed Air Drying without the need of Power or Service Water and moisture in compressed air damages installations, machines and pneumatic controls. Corrosion and pockets of bacteria can form quickly. For that reason treatment of the compressed air is always required as a preventative measure, with minimum cost implications. ECOTROC® MT is the most compact KSI solution for drying compressed air to specific demand requirements. Membrane dryers require no power and almost no service. Furthermore they only treat compressed air when it is needed, and at the required level...

ECOTROC® MT The Diffusion Process Dry Air Out a small part of the dried air recycles through a purging air nozzle dried compressed air purging air nozzle moisture diffuses into the purging air Dry air sweeps moisture off the membrane surface water vapour water vapour The path of the Compressed Air through the Membrane Dryer The compressed air flows into the dryer and is directed into the membrane • Pneumatic controls element. The still moist compressed air then flows through the selective hollow fibre membranes interior. Purging air is continuously diverted back along the outer walls of the membrane...

Membrane Dryer Performance Data Moisture reduction M aximum inlet capacity M aximum inlet capacity Maximum inlet capacity Maximum inlet capacity All specifications in reference to 7 bar g and an inlet pressure dew point of +35°C Maximum inlet temperature +60°C Maximum inlet pressure 10 bar g Dimensions and Connections Technical Data Pressure dew point: - 40°C maximum Operating temperature: +60°C maximum Suitable for different Dew Point requirements • T he requested dew point at the outlet of the membrane dryer can be adapted to the operator‘s specific requirement. Typical Dew Points at the outlet...