1. Catalogs
  2. KUBOTA
  3. Multipurpose Centrifuge S500 Series

Multipurpose Centrifuge S500 Series

Multipurpose Centrifuge S500 Series

Multipurpose Centrifuge S500 Series

Product catalog summary
Overview: The Multipurpose Centrifuge S500 Series offers both benchtop and floor-standing refrigerated models for laboratory applications, featuring advanced functionalities for efficient and safe operations.
Specifications:
  • Benchtop Centrifuge: Maximum capacity of 68×15 mL with a swing rotor and 8×50 mL with an angle rotor, achieving speeds of 4,800 rpm and 6,000 rpm respectively.
  • Floor-standing Refrigerated Centrifuge: Maximum capacity of 4×500 mL with a swing rotor and 8×50 mL with an angle rotor, reaching speeds of 4,800 rpm and 8,500 rpm respectively.
  • Both models adhere to IEC61010-2-020 standards and are equipped with direct-drive brushless motors controlled by an inverter microprocessor.
Features:
  • Self-Check Function: Facilitates daily inspection of sensors and lid operation for safety assurance.
  • Fail-Safe Function: Detects imbalance early to prevent damage and ensure user safety.
  • Power-Saving Mode: Reduces power consumption to approximately 7W when inactive.
  • User Interface: Features a self-luminous VFD display for clear visibility and intuitive use.
  • Mixed Loading Capability: Supports simultaneous centrifugation of different bucket types.
Safety Precautions:
  • Thoroughly read the instruction manual before use.
  • Cease use immediately if abnormalities such as rotor damage or unusual smells are detected.
  • Ensure proper supervision for users lacking technical knowledge.
Maintenance and Durability:
  • Rotors and buckets should be replaced after their operational lifetime to prevent metal fatigue.
  • KUBOTA performs rigorous durability tests to ensure product reliability.
Additional Information:
  • Certified under ISO 9001 and ISO 13485.
  • Not available for distribution in the USA, Canada, and Mexico.
  • Contact KUBOTA for detailed rotor specifications and maintenance information.
See more

Catalog excerpts

Multipurpose Centrifuge S500 Series-1

Product name Benchtop Centrifuge Product name Floor-standing Refrigerated Centrifuge 0S KUBOTA Multipurpose Centrifuge S500 Series Kubota has acquired ISO 9001 and ISO 13485 certification. Precautions for use Products in this catalogue are designed for use only by people who have the requisite technical knowledge, and must always be used with considerable care and only for their intended purpose. People who do not have adequate technical knowledge or training should only use the products under appropriate supervision by someone with expert knowledge, or else accidents are likely to occur. Prohibited Please immediately stop using the products in any of the cases listed on the right. The rotor or buckets appear to be damaged or corroded. When the replacement period (years of operation, operating lifetime) of a rotor has passed. The equipment emits a burning smell or becomes abnormally hot. You receive a weak electric shock when you touch the equipment with your bare hands. When any other abnormality or indication of failure is noticed. If any of the cases listed at the left occurs, immediately turn off the power, disconnect the power cable plug or connecting terminals from the main power outlet, place a “Do not use” sign on the unit, and contact the nearest branch of Kubota Corporation. To use the equipment safely, be sure to read the instruction manual carefully before you start operations. Do not misplace the instruction manual. Keep the instruction manual nearby so that you can refer to it whenever necessary. • The term of supplying spare parts for repair is 7 years after discontinuation of production (except spare parts which we are unable to procure). • This catalogue is not for distribution in the USA, Canada and Mexico as products shown are not for sale in these countries. unified design, innovation and user-oriented Copyright © 2019 KUBOTA CORPORATION W-MAY, Printed in Japan

 Open the catalog to page 1
Multipurpose Centrifuge S500 Series-2

Universal design Innovation‒New Function Visual and intuitive operation in an interface with a rounded body offering smooth lines and Self-check function to support daily inspection of your centrifuge sharp lines. This design shattered the traditional image of hard, square centrifuges, while our new centrifuge is packed full of the latest technology. Daily operation checks of previous centrifuges were not able to check whether sensors and lid sensors operated normally; however, the Self-Check Function mounted on the S500 Series allows easy checks of Start of Self-Check Mode sensors and lid sensor...

 Open the catalog to page 2
Multipurpose Centrifuge S500 Series-3

Responding to User Needs in a Multitude of Ways Equipped with self-luminous display (VFD) Mixed Loading Minimum view angle of ■ Equipped with technology unique to Japan, VFD (Vacuum KUBOTA achieved Mixed Loading where two different fluorescent display) types of buckets ca n be centrifuged at the same time. ■ Visibility of display generally depends on the contrast ratio Moreover, frequently used combin ations of buckets are offered as a set as standard so that the a ccessories of dots in the display. VFD dots are become more affordable. self-luminous and other parts are ST-724M 16×15mL conical tubes;...

 Open the catalog to page 3
Multipurpose Centrifuge S500 Series-4

Responding to User Needs in a Multitude of Ways KUBOTA s Dedication to Safety Compact body, but wide interior IEC61010-2-020 : International safety requirements for centrifuges It has a wide chamber (diameter: 38 cm), but compact body ■ Centrifuge rotors store large amounts of kinetic energy when spinning at high rates. All of the (height: 32 cm, depth: 53 cm). (For S500T only) rotors pass strict tests for durability under maximum load, but wear and external factors mean that rotor breakage during centrifugation cannot be entirely ruled out. Equipped with a delayed start function after setting...

 Open the catalog to page 4
Multipurpose Centrifuge S500 Series-5

Rotor specifications This tube rack is convenient and available for 5 mL, 7 mL, and 10 mL blood collection tubes and 15 mL glass tubes. Rotors are subject to durability. For more details, please contact us. Tube Flow cytometry Nominal capacity 68×5∼7mL thin blood collection tube 24×8mL CPT cell preparation tube 7ml採血管 7ml採血管 10ml採血管 48×5-10mL blood 15ml 48×5-10mL blood 28×5-10mL blood 7ml採血管 10ml採血管 10ml採血管 collection tube/ collection tube/ collection tube/ 15mL glass tube 15mL glass tube 15mL glass tube blood collection tube / 15mL glass tube 28×15mL 16×15mL 28×15mL 32×15mL conical tube conical...

 Open the catalog to page 5
Multipurpose Centrifuge S500 Series-6

Plate rotor A Rotors are subject to durability. For more details, please contact us. ^The number of times allowed for autoclaving is limited. For more details, please contact us. *1. Please test the strength of plates before starting centrifugation. The lower plate may be crushed in some cases. *2. This tray is convenient when taking a plate out of the bucket. *3. The tray is optional (sold separately). *4. This tube is a Nalgene plastic tube (Catalog No. 3110-0120, 3117-0120). *5. This tube is a Falcon tube (Catalog No. 352006, 352018, 352059). 1. A blood collection tube with a cap diameter...

 Open the catalog to page 6

All KUBOTA catalogs and technical brochures

  1. Model 9942

    8  Pages

  2. Model 5500

    4  Pages

  3. Model 3520

    4  Pages

  4. 5922

    8  Pages

  5. 5911

    8  Pages

  6. 8420

    4  Pages

  7. 4000, 4200

    8  Pages

  8. 2420, 2800

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.