BPM-60

BPM-60

BPM-60

Product catalog summary
Overview: The BPM-60 is a non-invasive, online measurement system for monitoring dissolved oxygen and pH in shake flasks. It is designed for use with specific shaking machines and is optimized for the cultivation of Escherichia coli.
Specifications:
  • Applicable Machines: SBM/SS-X, LT-X, ISF1-X, ISF4-X
  • Measurement Parameters: Dissolved oxygen (DO) and pH
  • Flask Compatibility: 250, 500, 1000, 2000 mL
  • Temperature Range: 5 - 50°C
  • Power Supply: Integrated socket, no batteries required
Sensor Flask Specifications:
  • Oxygen Sensor: Measuring range 0-100% O2, response time 30 sec at 25°C, accuracy 0.05% O2 at 0.2% O2
  • pH Sensor: Measuring range 5.5-8.5 pH, response time 0.01 pH at pH 7, accuracy 0.05 pH at pH 7
  • Storage Stability: 18 months if stored in the dark
  • Sterilization: Delivered irradiated, resterilization options vary
Software and Data Logging:
  • ISIS-Software: Capable of logging dissolved oxygen, pH, and other shaker parameters
  • GMP Compliance: 21 CFR Part 11 compliance with audit trail
Key Features:
  • Continuous and automatic data logging for reproducibility and optimization
  • Pre-calibrated sensor flasks with one-point calibration option
  • Supports PAT initiative for reproducible starter cultures
Contact Information: Adolf Kühner AG, Dinkelbergstrasse 1, CH – 4127 Birsfelden (Basel), Switzerland. Phone: +41 (0) 61 319 93 93, Email: [email protected]
See more

Catalog excerpts

BPM-60-2

Applicable for the following shaking machines SBM/SS-X, LT-X, ISF1-X, ISF4-X 2 Dissolved oxygen concentration DO [%] and pH [-] during cultivation of Escherichia coli in shake flask (Corning, 250ml); Mineral medium with 20g/L glucose, 250rpm shaking frequency, 50mm shaking diameter, 10mL filling volume, temperature 37°C BPM-60 BPM-60 (Bioprocess Monitoring) is a non-invasive, online measurement of dissolved oxygen and pH in shaken flasks. Continuous recording of dissolved oxygen and pH Dissolved oxygen and pH can be measured easily online using the BPM-60. The system allows for one or both parameters...

 Open the catalog to page 2
BPM-60-3

Shake flask with sensor spots for non-invasive online measurement of Kuhner tray with integrated BPM-60 Sensor flask oxygen • Measuring range • Temperature range aqueous solutions, ethanol, • Storage stability if the sensor is stored in the dark sensor flasks are pre-calibrated, one-point calibration is possible at the beginning of the experiment when the medium conditions (02) are defined sensor flasks are delivered irradiated steam sterilization, ethylene oxide, gamma irradiation Measuring range • Ports 5.5 - 8.5 pH one port of glassfibre (side) Accuracy diameter of connector ring: 108mm 0.05...

 Open the catalog to page 3
BPM-60-4

BioProcess Monitoring www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland

 Open the catalog to page 4

All Kuhner AG catalogs and technical brochures

  1. SB200-X

    8  Pages

  2. SB10-X

    8  Pages

  3. Kuhner shaker

    23  Pages

  4. FlowCon

    4  Pages

  5. FeedBeads

    4  Pages

  6. LS-X

    8  Pages

  7. SB50-X

    8  Pages

  8. LT-X

    8  Pages

  9. SR200-X

    4  Pages

  10. SBM_SS-X

    8  Pages

  11. Kuhner shaker

    21  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.