ES-X (Lab-Shaker)
8Pages

{{requestButtons}}

Catalog excerpts

ES-X (Lab-Shaker) - 1

ES-X (Lab-Shaker) Shaker with separate control unit suitable for use in incubators with humidity

Open the catalog to page 1
ES-X (Lab-Shaker) - 2

2 ES-X with separate controller The ES-X is a specially designed shaker with a separate controller. It is ideal for use in existing incubators or temperature controlled rooms as the shaking unit with its stainless steel casing can be placed in areas of high temperature (up to 80°C) and humidity (up to 95% rH). Performance characteristics + For use in incubators or temperature controlled rooms + Ideal for cell culture applications + Special version available for robotic systems + Minimal heat transfer and low energy consumption + Stainless steel motor casing Installation in existing...

Open the catalog to page 2
ES-X (Lab-Shaker) - 3

Technical data Interface, standard CAN-Bus Interface, optional USB, Ethernet, digital, analogue Consumption, maximum 65W (130W with high torque drive SMX1031) • Shaking unit • Shaking motion Speed 1 xTray, size .E(420x420mm) I^^L^JIA.^.U}. 20...500 rpm Loading, maximum 25kg * linear, 12.5 mm 20...400 rpm Setting, digital 1 rpm * linear, 25.0 mm 20...300 rpm Accuracy, absolute ±0.1 rpm * linear, 50.0 mm 20...200 rpm Acceleration controlled Active brake adjustable Stop on position adjustable • Mains connection

Open the catalog to page 3
ES-X (Lab-Shaker) - 4

To suit your application Universal trays The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky mats, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. • Order number Description Clamps for Erlenmeyer flasks • Order number Flask size in ml Max. number of clamps per Universal tray

Open the catalog to page 4
ES-X (Lab-Shaker) - 5

ES-X (Lab-Shaker) | 5 ᕡ Tray F-250 with fixed clamps Tray E (420 x 420 mm) with fixed clamps Order number Description Tray EX (500 x 420 mm) with fixed clamps Order number Description Trays with fixed clamps The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays (E, EX and F) are available in a variety of flask clamp sizes from 25 to 6000ml. Tray F (800 x 420 mm) with fixed clamps ᕡ Order number Description

Open the catalog to page 5
ES-X (Lab-Shaker) - 6

F-tray with sticky strips g) Tray for centrifuge tubes Trays for microtiter plates Kuhner has designed trays specifically for microtiter plates. Handles at the front ofthe tray open and close the special clamping mechan- ism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four micro- titer plates. The trays are suitable for all types of plates (deep well, Trays for centrifuge tubes Q The use of centrifuge tubes (e.g. 50ml Falcon tubes and TPP 50ml tubes) in cell culture screening is well established. Kuhner offers special...

Open the catalog to page 6
ES-X (Lab-Shaker) - 7

Trays with support bars Q These trays offer an alternative to both clamps and sticky mats and are ideal for tall containers. The tray is covered with a rubber mat and has an upright at each corner. E and EX size trays are fitted with four cross supports while the F tray is equipped with six.These support bars securely clamp containers. • Order number Description SM4120.4 EA-tray with rubber mat and SMX4120.4 EXA-tray with rubber mat and SM4130.6 FA-tray with rubber mat and Trays for separating vessels Kuhner has also designed a special tray for shaking separating vessels. This very flexible...

Open the catalog to page 7
ES-X (Lab-Shaker) - 8

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland

Open the catalog to page 8

All Kuhner AG catalogs and technical brochures

  1. SB10-X

    8 Pages

  2. Kuhner shaker

    23 Pages

  3. FlowCon

    4 Pages

  4. FeedBeads

    4 Pages

  5. BPM-60

    4 Pages

  6. LS-X

    8 Pages

  7. SB200-X

    8 Pages

  8. SB50-X

    8 Pages

  9. LT-X

    8 Pages

  10. SR200-X

    4 Pages

  11. SBM_SS-X

    8 Pages

  12. Kuhner shaker

    21 Pages