ISF1-X (Climo-Shaker)
8Pages

ISF1-X (Climo-Shaker) Stackable incubator shaker

+ Up to three machines can be stacked + Large shaking capacity with small footprint + Adjustable shaking diameters + Heating and cooling + CO and controlled humidity options 2 The ISF1-X incubator shaker is suitable for many applications in laboratories, research centres and production facilities. It offers a large shaking capacity with a small footprint, as well as many features allowing straightforward, safe handling of product. Reliability pays All ISF1-X components are designed for durability and reliability. A Kuhner shaker is a cost effective investment in quality backed with a five...

• Technical data Cooling Humidity control Temperature maximum Humidity maximum Temperature minimum Power consumption Weight (with cooling) Accuracy, absolute Interface, standard Interface, optional digital, analogue Ambient temperature • Shaking unit Setting, digital * XC incubator shakers are optimised for cell cultivation + CO2 control (SMX1034) included as standard + Temperature max.: 60°C + Improved temperature accuracy: ± 0.25°C (37°C) • Mains connection Tray, size Setting, digital Loading, maximum Accuracy, absolute Setting, digital Accuracy, absolute Water refill Water heater Door...

4 ᕢ Illumination unit for photosynthesis (LED) Options Multiple options for your shaker Cooling All Kuhner incubator shakers can be fitted with cooling. The refrigeration system is regulated by a fully digital PID control ensuring minimal energy consumption. The cooling is switched on only when required as determined by the chamber temperature and set point. Illumination unit for photosynthesis (LED) ᕢ The ceiling of any Kuhner incubator shaker can be fitted with LED modules for the cultivation of phototrophic organisms. The control module allows full programming of night/day cycles and...

ᕣ ISF1-X with a pull-out table Pull-out table ᕣ The pull-out table is designed for the ISF1-X and ISF4-X incubator shakers as well as the Rack System. This remarkable device makes loading and unloading trays much easier. Dual table The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels. Each level will accept an E, EX or F size tray. However, with the dual table the shaking speed is limited to a maximum of 200 rpm. Perspex cover To prevent accidental operation of the controllers, the panel can be protected by a perspex...

Tray F-250 with fixed clamps F-tray (800 x 420 mm) for microtiter plates To suit your application The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky strips, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple._ Clamps for Erlenmeyer flasks Order number Flask size Max. number of F-tray with fixed clamps 0 The clamps are riveted onto this tray and cannot be removed. It offers maximum security and will often hold a larger number of flasks rather than a universal tray. • Order...

ᕧ F-tray for centrifuge tubes F-tray for centrifuge tubes ᕧ Order number: SM3805 The use of centrifuge tubes (e.g. 50ml Falcon tubes and TPP 50ml tubes) in cell culture screening is well established. This F-tray has a capacity of 120 x 50ml centrifuge tubes (5 racks of 24). Holders for 600ml TPP tubes are also available. F-tray with sticky strips Order number: SMX350001 A tray fitted with sticky strips is especially useful for flasks shaken at low speeds (up to 200 rpm). The flask is placed directly on the sticky strip without the need for any other support. Different flask sizes can be...

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland