Kuhner shaker Incubator shaker with large shaking capacity

ISF4-X with 4 shaking units + All stainless steel interior + Large shaking capacity + Easy access to contents + Each shaking unit has its own direct drive + Door heating, with controlled humidity The Kuhner ISF4-X incubator shaker offers large shaking capacity with temperature, humidity and CO2 control all available. The shaker cabinet can incorporate four or even five independent shaking units which are height adjustable. The shaking diameter and speed of each unit can be individually selected. Standard diameters are 12.5, 25 and 50 mm. Other shaking diameters are possible. Guaranteed quality...

Technical data Humidity control Temperature minimum ambient + 10°C Humidity maximum Power consumption Weight (with cooling) 520 kg Setting, digital 0.1 °C *XC incubator shakers are optimised Interface, standard Interface, optional USB, Ethernet digital, analogue • Accuracy, absolute Principle of sensor capacitive Water refill automatic Mains connection Active brake Shaking motion * can be changed/other diameters on request Principle of sensor Infrared, NDIR (including non-linearity, repeatability and calibration uncertainty)

4 ᕢ Illumination unit for photosynthesis (LED) Options Multiple options for your shaker Cooling All Kuhner incubator shakers can be fitted with cooling. The refrigeration system is regulated by a fully digital PID control ensuring minimal energy consumption. The cooling is switched on only when required as determined by the chamber temperature and set point. Illumination unit for photosynthesis (LED) ᕢ The ceiling of any Kuhner incubator shaker can be fitted with LED modules for the cultivation of phototrophic organisms. The control module allows full programming of night/day cycles and variable...

Pull-out table ᕣ The pull-out table is designed for the ISF1-X and ISF4-X incubator shakers as well as the Rack System. This remarkable device makes loading and unloading trays much easier. Dual table The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels. Each level will accept an F size tray. However, with the dual table the shaking speed is limited to a maximum of 200 rpm. Black window Available for light sensitive medium or organisms. Any Kuhner incubator shaker can be delivered with blackened windows to prevent unwanted...

Clamps of different sizes ) Tray F-250 with fixed clamps To suit your application The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky strips, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. Clamps for Erlenmeyer flasks • Order number Flask size Max. number of F-tray with fixed clamps 0 The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays are available in a variety...

F-tray for microtiter plates 0 Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechan- ism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four micro- titer plates. The tray is suitable for all types of plates (deep well, F-tray for centrifuge tubes Q The use of centrifuge tubes (e.g. 50ml Falcon tubes and TPP 50m tubes) in cell culture screening is well established.This F-tray has a capacity of 120 x 50ml centrifuge tubes (5 racks of 24). Holders...

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland