LS-X
8Pages

Sturdy bench top shaker

2 LS-X with a universal tray The Kuhner LS-X is a sturdy bench top shaker designed for continuous and maintenance-free operation. The LS-X shaker has a load capacity up to 25kg. Performance characteristics + Sturdy bench top shaker + Accepts loads up to 25kg + Linear or orbital movement + Large display and touch pad controls + Ideal base for customised trays and holders Low energy requirements The in-house designed Kuhner magnetic drive system guarantees accurate control and low energy consumption even at high speeds. The LS-X is available with orbital or linear movement. User friendly...

Technical data Interface, standard CAN-Bus Interface, optional USB, Ethernet, digital, analogue Consumption, maximum 65W (130W with high torque drive SMX1031) • Shaking unit Acceleration controlled Active brake adjustable Stop on position adjustable Mains connection Shaking motion Speed

To suit your application Universal trays The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky mats, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. • Order number Description Clamps for Erlenmeyer flasks • Order number Flask size in ml Max. number of clamps per Universal tray

LS-X (Lab-Shaker) | 5 ᕡ Tray F-250 with fixed clamps Tray E (420 x 420 mm) with fixed clamps Order number Description Tray EX (500 x 420 mm) with fixed clamps Order number Description Trays with fixed clamps The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays (E, EX and F) are available in a variety of flask clamp sizes from 25 to 6000ml. Tray F (800 x 420 mm) with fixed clamps ᕡ Order number Description

Trays for microtiter plates Kuhner has designed trays specifically for microtiter plates. Handles at the front ofthe tray open and close the special clamping mechan- ism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four micro- titer plates. The trays are suitable for all types of plates (deep well, Trays for centrifuge tubes Q The use of centrifuge tubes (e.g. 50ml Falcon tubes and TPP 50ml tubes) in cell culture screening is well established. Kuhner offers special trays in three different sizes for this purpose.The E...

Tray with support bars Trays with support bars Q Tray F (800 x 420 mm) These trays offer an alternative to both clamps and sticky mats and Order number Description Vessels are ideal for tall containers. The tray is covered with a rubber mat SM430250 FS-250 10 and has an upright at each corner. E and EX size trays are fitted with SM4302502 FS:250/2 20 (2 layers) four cross supports while the F tray is equipped with six.These sup- SM430500 FS-500 8 • Order number Description SM4310002 FS-iOOO/2 I?..!?.layers) SM4120.4 EA-tray with rubber mat and SMX4120.4 EXA-tray with rubber mat and SM4130.6...

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland