LT-X
8Pages

{{requestButtons}}

Catalog excerpts

LT-X - 1

LT-X (Lab-Therm) Space saving stackable incubator shaker

Open the catalog to page 1
LT-X - 2

The Kuhner LT-X (Lab-Therm) incubator shaker has the same + Fits into any laboratory + Used in biotech and pharmaceutical capabilities as the larger ISF1-X and ISF4-X models. The industries incubator shaker was specially developed to address the + Accepts flasks up to 6 litres + Two units can be stacked - no special kits shaking needs of the biotechnology and pharmaceutical or tools required Humidity and CO2 control available industries. The practical size of the LT-X means it will fit in any laboratory. Extra space Exceptional chamber height means flasks up to 6 litres capacity can be...

Open the catalog to page 2
LT-X - 3

• Machine •Temperature # XC incubator shakers are optimised Gas; volume 2601 Setting, digital 0.1 °C for cell cultivation coo ling) 170 kg Accuracy, absolute ± 0.30°C (37°C) + C02 control (SMX1034) included Illumination Halogen (2x10W) (across the tray) t9^°^J17.°.^)l asstandard Operation menu in de, fr, it, en, es Principle of sensor Pt-100 + Temperature max.: 60°C Interface, standard CAN-Bus Power of heating 500W + Improved temperature accuracy: Interface, optional USB, Ethernet, Power of cooling 90. . .155W ± 0.25°C (37°C) digital, analogue Air circulation 160m3/h Am.bJMlerEP£r.aMe.10°C...

Open the catalog to page 3
LT-X - 4

Options Multiple options for your shaker Cooling All Kuhner incubator shakers can be fitted with cooling. The refrigeration system is regulated by a fully digital PID control ensuring minimal energy consumption. The cooling is switched on only when required as determined by the chamber temperature and set point. Humidity control Humidity control is an important factor in successful fermentation. Evaporation from microtiter plates, or when cultivating in flasks for long periods (e.g. cell cultures), can be significantly reduced with humidification. CO 2 control CO 2 control is essential when...

Open the catalog to page 4
LT-X - 5

Dual table ᕢ The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels. Each level will accept an E or EX size tray. However, with the dual table the shaking speed is limited to a maximum of 200 rpm. Perspex cover To prevent accidental operation of the controllers, the panel can be protected by a perspex cover. IQ-OQ Documentation IQ-OQ (Installation Qualification and Operation Qualification) is an equipment qualification required for GMP procedures. This service is available from Kuhner and can also be carried out at the...

Open the catalog to page 5
LT-X - 6

Clamps of different sizes To suit your application The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky strips, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. Clamps for Erlenmeyer flasks Order number Flask size Max. number of EX-tray with fixed clamps The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays are available in a variety of flask clamp sizes from...

Open the catalog to page 6
LT-X - 7

ᕤ EX-tray for centrifuge tubes EX-tray with sticky strips Order number: SMX340001 A tray fitted with sticky strips is especially useful for flasks shaken at low speeds (up to 200 rpm). The flask is placed directly on the sticky strip without the need for any other support. Different flask sizes can be used. Sticky strips are available individually or in sets and can also be supplied already fitted to a tray. The EX-size tray accepts five strips. EX-tray for centrifuge tubes ᕤ Order number: SMX3804 The use of centrifuge tubes (e.g. 50ml Falcon tubes and TPP 50ml tubes) in cell culture...

Open the catalog to page 7
LT-X - 8

Shakers & Accessories www.kuhner.com Adolf Kühner AG • since 1949 Dinkelbergstrasse 1 CH – 4127 Birsfelden ( Basel ) Switzerland

Open the catalog to page 8

All Kuhner AG catalogs and technical brochures

  1. SB10-X

    8 Pages

  2. Kuhner shaker

    23 Pages

  3. FlowCon

    4 Pages

  4. FeedBeads

    4 Pages

  5. BPM-60

    4 Pages

  6. LS-X

    8 Pages

  7. SB200-X

    8 Pages

  8. SB50-X

    8 Pages

  9. SR200-X

    4 Pages

  10. SBM_SS-X

    8 Pages

  11. Kuhner shaker

    21 Pages