THE VENEER SPECIALIST MASTERING HIGHLY AESTHETIC CEMENTATION PANAVIA™ Veneer LC Challenging task, great solution.

CHALLENGING TASK, GREAT SOLUTION Minimally invasive procedures using highly aesthetic restorations is what patients expect when they seek restorative treatment. With the various types of restorations available today, it is possible to meet these expectations – provided that the right materials are used. For the placement of veneers, a resin cement must be selected that supports long-lasting aesthetics, is easily applied, offers a working time sufficient for simultaneous cementation of multiple restorations and provides excellent bond strength. The new “PANAVIA™ Veneer LC” is precisely what you...

INDICATIONS “PANAVIA™ Veneer LC” can be used for permanent cementation of - Veneers - Inlays and onlays with less than 2 mm in thickne

INNOVATIVE CURING TECHNOLOGY A veneer cement should offer a long working time, but still obtain a high bond strength that is stable over time. Kuraray Noritake Dental Inc. has developed a way of using the touch-cure technology with a light-curing cement to provide both. “PANAVIA™ Veneer LC” is a light-curing resin cement system that offers excellent stability under ambient light, which leads to a working time of 200 seconds*. This allows you to place multiple veneers at a time without having to race against setting. Polymerization may be started whenever you are ready for it. WORKING TIME* *Working...

ONE-COMPONENT SELF-ETCHING PRIMER Contributes to the polymerization of the adhesive interface. LIGHT-CURE CEMENT PASTE Excellent ambient light stability. LIGHT-CURE Seal the adhesive interface with tooth structure by touch-cure while ensuiring sufficient operation time. Laminate Veneer “PANAVIA™ Veneer LC” Paste Tooth Structure Chemical polymerization catalyst contributes to polymerizati

“PANAVIA™ V5” Tooth Primer is a self-etching adhesive for tooth structure (dentin and enamel) that seals the tooth-adhesive interface securely as soon as “PANAVIA™ Veneer LC” Paste is applied to it. This touch-cure technology initiates the polymerization at the adhesive interface only and establishes a strong bond to enamel and dentin, but does not affect the setting reaction of the cement. A high bond strength to restorative materials is obtained by use of the proven “CLEARFIL™ CERAMIC PRIMER PLUS”. (MPa) SHEAR BOND STRENGTH TO HUMAN TEETH 30 25 Enamel Dentin Test conditions: Polishing #1000,...

OPTIMISED HANDLING It is possible to reduce the time and effort involved in veneer placement with a cement that supports homogeneous cement application, smooth veneer positioning and excess removal, and quick polishing. “PANAVIA™ Veneer LC” offers all the required features and gives high control thanks to the specially designed application tip. NON-STICKINESS The resin cement offers an excellent and ideal consistency for easy and secure application across the intaglio surface, as it does not stick to the application tip due to nanocluster filler technology. IDEAL CONSISTENCY Newly developed spherical...

HIGH AESTHETICS Due to their generally minimum thickness and high translucency, the aesthetic appearance of veneers is strongly affected by the cement colour. Therefore, it is essential to use a resin cement that is colour stable and produces margins that remain undetectable over time. “PANAVIA™ Veneer LC” fulfils these tas

FOUR HIGHLY AESTHETIC SHADES With a shade matching individual requirements, lifelike results are easily obtained. “PANAVIATM Veneer LC” Paste MATCHING TRY-IN PASTES The “PANAVIA™ V5” Try-In Paste match the “PANAVIA™ Veneer LC” shades and allow for a simulation of the final appearance. “PANAVIA™ V5” Try-In Paste MINIMAL FILM THICKNESS Thanks to its flowability and low film thickness,“PANAVIA™ Veneer LC” produces a thin, evenly distributed cement layer contributing to easy seating without interference and to

GREAT POLISHABILITY AND GLOSS RETENTION A great polishability and an excellent gloss retention support aesthetic margins over time. Change in glossiness due to toothbrush abrasion test. High gloss durability (gloss retention) thanks to a high density of fine fillers. GLOSS RETENTION 50 40 30 20 10 Source: Kuraray Noritake Dental Inc. Toothbrush wear GLOSS RETENTION “PANAVIA™ Veneer LC” Variolink* Esthetic LC RelyX* Veneer Test Conditions: Specimen ø10mm, thickness 2mm. After smoothing the surface with water-resistant abrasive paper of #1000 to #2500, final polishing with lapping film. Initial...

RESISTANCE TO DISCOLOURATION High colour stability is probably the most important feature responsible for long lasting aesthetics, which is provided by a well-balanced formulation and the touch-cure technology. CLINICAL CASE Courtesy of Dr. Sato 1. Initial status before six veneers preparation (from #13 to #23). 2. ”PANAVIA™ Veneer LC” excellent consistency and paste viscosity allowed for easier dispensing, seating and excess cement removal. 3. Light-cure of each area and margins. 4. Final result after cementation of six veneers of “KATANA™ Zirconia” STML. Please refer to the Instructions for...

TRULY PANAVIA It all started in 1983, when “PANAVIA™ EX” was launched as the first adhesive resin cement containing the original MDP Monomer from KURARAY CO., LTD. Quickly, the “PANAVIA” brand became popular among dental practitioners worldwide for its excellent adhesion. In order to lay the foundation for streamlined cementation procedures and excellent aesthetics, existing formulations were improved and completely new technologies developed. All this ultimately resulted in the current line-up of easy-to-use and highly aesthetic resin cements that provide top-level bond strength. ORDER INFORMATION...