Safety cabinets Safe storage of hazardous substances www.labosystem.it
Open the catalog to page 1The technical solutions by Labosystem have always been implemented in compliance with the many EU directives, aimed at continuously improving safety in the workplace, in order to manufacture efficient collective protection equipment, featuring cutting-edge technology and with great respect for the environment. The LABOSAFE line of safety cabinets is the result of this and represents the response of the Labosystem design team to a series of complex demands for the safe storage of toxic, corrosive, irritant and hazardous substances that are harmful either to man or to the environment. The goal...
Open the catalog to page 2ACTIVE ERGONOMICS ACTIVE ERGONOMICS Typhoon Twin The ergonomics of the LABOSAFE cabinet allow a simple approach, since it has been designed for its intended use and it is not just a simple cabinet that has been adapted to suit this purpose. A series of signs placed on the outside and on the inside of the storage compartment provide valuable information on the tasks to be carried out in order to ensure safe storage of the products. This actively contributes to preventing the most common risks, especially the risk of storing incompatible substances, accidental spillage, and risks for workers such...
Open the catalog to page 3CONSTRUCTION FEATURES CONSTRUCTION FEATURES The technical solutions implemented by the LABOSAFE development team are in line with the quality policy that has always characterised Labosystem products, made with durable materials and components with high corrosion resistance to ensure a life cycle that justifies investing in this purchase. Labosafe is certified in accordance with the EN 14727:2006 standard, which defines the requirements and test methods for the storage units used in laboratories. This standard specifies the resistance, duration and safety requirements in order to avoid serious...
Open the catalog to page 4During the development stage of the cabinet, the extraction system was a crucial element to manufacture a device that is both effective and able to offer a high level of comfort in laboratories. Hence, we decided to apply the experience acquired with the TYPHOON TWIN hoods, the line of fume hoods with high technological content by Labosystem. The system uses a rear exhaust chamber for conveying the air, which, after passing through the grids placed at the front on the doors, laps the trays and is first filtered with activated carbon and then expelled outside by the electric exhaust fan positioned...
Open the catalog to page 5L.I.C. (Labosafe Integrated Control) is an advanced digital controller, which supervises cabinet management, as well as all the alarms, extraction and filtration functions, and the management of programmed servicing. The interface is equipped with an RS232 communication port and allows several parameters to be monitored, such as: • Servicing intervals • Filter replacement • Interior lighting management • Open door alarm • Extraction volume setting (with interior extractor fan) • Internal temperature alarm (*) • Application of controlled access locks (*) LA PORTA A closf thc USARE ACQUA (N CASO...
Open the catalog to page 6LABOSAFE AND TYPHOON TWIN LABOSAFE AND TYPHOON TWIN Typhoon Twin The quality of the air inside the laboratories is affected by the method used for storing containers with chemical products and by the various primary barriers used to remove contaminants at the source (fume hoods, ventilated cabinets, reagent cabinets, etc.). The space in laboratories is always insufficient and each fume hood, cabinet, cupboard, overhead shelf, shelf or other free surfaces are used for storage purposes, or rather as a place where all kinds of containers are accumulated. This often creates problems or may even cause...
Open the catalog to page 7The cabinets must be positioned away from corridors, work areas, access to the laboratory or to a room, and emergency exits, and far from naked flames (Bunsen burners, stoves, etc.) and should not stand in the way of emergency equipment (fire extinguishers, first aid kit, eye washers or showers, etc.). Cabinets requiring extraction, in particular, must ensure a minimum of 10 air changeovers per hour and the tubes, preferably made of plastic materials, should not pass through other rooms other than the one where the cabinet is installed so that the shortest route available is used. Periodically...
Open the catalog to page 8Typhoon Twin Correct storage must necessarily take into consideration the incompatibility of chemical substances, since accidental contact between two chemically incompatible substances may lead to highly dangerous reactions. One of the most important rules to follow in order to work safely in a chemical laboratory is to know the chemical product that is being handled. The term “know” actually entails our ability to identify it clearly, to know the properties of the class of compounds to which it belongs, to be able to quickly read the label that distinguishes it from other substances, and to...
Open the catalog to page 9Built and certified in accordance with the EN 14727 standard Interior LED lighting activated by opening the doors (for non-flammable substances) (it requires 220V power supply) volume m3 0,924 weight including packaging 130 kg A WT48099 L.I.C. - LABOSAFE INTEGRATED CONTROLLER Digital controller to manage cabinet functions: Presence of voltage for extraction Extraction calibration Interior lighting Open door alarm and silencing Filter replacement Min./max. expelled air flow (m3/h) 25 - 150 WT85060 FILTER CELL AND ACTIVATED CARBONS Accessories: WT80010: Tank for tray in Polyethylene (Pe) 520x400x80...
Open the catalog to page 10Typhoon Twin
Open the catalog to page 11SISTEMI MODULARI PER LABORATORIO
Open the catalog to page 12