*mymedicalexpo

Catalogs
Labotemp Systems
Muffle Furnace FMU-20

Muffle Furnace FMU-20

Product catalog summary

Description: The Labotemp Muffle Furnace FMU-20 is a bench-top box furnace designed for high-temperature laboratory processes up to 1200°C. It features a 40-liter chamber with heating elements on three sides for uniform heat distribution, essential for processes like sintering, calcination, and ceramic firing. The furnace is insulated with high-alumina ceramic fiber and has a steel exterior with an air-cooling fan for safety and efficiency. A programmable digital PID controller ensures precise temperature control with ±1°C accuracy.

Specifications: The furnace has a capacity of 40 liters and can reach a maximum temperature of 1200°C, with a continuous working temperature of 1100°C. It operates on AC 220V 50Hz power, with a heating rate of 25°C/min. The chamber size is 300 × 300 × 450 mm, and it features a three-phase power supply. The insulation material is 1500 Grade Alumina Ceramic Fiber.

Features: Key features include a safe-touch steel body, high-grade insulation, three-side embedded heating elements, and a front-loading chamber with a stainless steel door. It also includes a microprocessor-based PID controller, overheat protection, power failure recovery, and a leakage circuit breaker for safety.

Applications: The FMU-20 is suitable for high-temperature material testing, heat treatment processes, pharmaceutical and chemical sample analysis, and quality control in academic and research labs.

Standard Accessories: The furnace comes with a Type N Thermocouple, crucible tongs, thermal resistance gloves, and a manual book. Optional accessories include an exhaust chimney device, extra thermocouples, and alumina crucibles.

Catalog excerpts

Your Partner in Temperature Precision Muffle Furnace FMU-20 www.labotemp.com | [email protected]

Open the catalog to page 1

Description: Labotemp Muffle Furnace FMU-20 is a bench-top box furnace engineered for laboratories requiring reliable high-temperature processing up to 1200°C. Designed as a front-loading laboratory furnace with a 40-liter chamber (300×300×450mm), it features heating elements embedded on three sides for fast, uniform heat distribution and minimal temperature gradient, critical for consistent results in sintering, calcination, ashing, ceramic firing, glass seal firing, wax burnout, and gravimetric analysis workflows. Built with high-alumina ceramic fiber board insulation and a steel exterior with...

Open the catalog to page 2

Safe-Touch Steel Body High-grade 1500 alumina ceramic fiber insulation for thermal efficiency Three-side embedded heating elements for uniform temperature distribution Robust steel construction with air cooling for safe exterior handling Front-loading chamber with stainless steel hinged door Built-in vent port (optional) for moisture and contaminant removal Optimized chamber design for uniform heat transfer Microprocessor-based PID controller with auto-tuning Programmable temperature control with multi-segment profiles Simultaneous display of set and actual temperature Precise ±1°C control accuracy...

Open the catalog to page 4

Pharmaceutical and chemical sample ashing and thermal analysis Academic and research labs requiring programmable thermal profiling Quality control and validation processes under controlled temperature conditions Chamber Furnace Type N Thermocouple Crucible tongs Thermal Resistance gloves Manual book Exhaust Chimney Device Extra N type Thermocouple Alumina Crucible Your Partner in Temperature Precision 144 E, Midwest Avenue, Casper WY 82601, USA Website: www.labotemp.com | Email: [email protected]

Open the catalog to page 5

All Labotemp Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list