1. Catalogs
  2. Labotemp Systems
  3. Tube Furnace 1200°C | 205 mm Heating Zone FMT-01

Tube Furnace 1200°C | 205 mm Heating Zone FMT-01
1 /4Pages

Tube Furnace 1200°C | 205 mm Heating Zone FMT-01

Tube Furnace 1200°C | 205 mm Heating Zone FMT-01
1 /4Pages

Catalog excerpts

Tube Furnace 1200°C | 205 mm Heating Zone FMT-01-1

Your Partner in Temperature Precision Tube Furnace 1200SC| 205 mm Heating Zone FMT-01 www.labotemp.com [email protected]

 Open the catalog to page 1
Tube Furnace 1200°C | 205 mm Heating Zone FMT-01-2

Labotemp Horizontal Tube Furnace FMT-01 is a compact, high-performance laboratory tube furnace for precision heat treatment up to 1200°C (working <1100°C). It features a 040 mm high-purity quartz tube and a 205 mm single heating zone, SiC heating rods and resistance-wire elements under PID control, delivering ±1°C accuracy and ±5°C uniformity with 30-segment programmable temperature profiles. Designed for material synthesis, annealing, sintering, semiconductor processing, powder metallurgy and nanomaterial research, this tube furnace supports controlled-atmosphere and vacuum tube furnace configurations...

 Open the catalog to page 2
Tube Furnace 1200°C | 205 mm Heating Zone FMT-01-4

Features: SiC Heating Rod Heating Rod 1200°C maximum operating temperature PID automatic control via current limiting phase angle fired the resistor 30 segments time temperature curve can be set arbitrarily The tube furnace uses high-purity quartz or alumina tubes as furnace tubes The furnace tubes are designed to be installed horizontally The temperature zone is designed to be single zone Applications: Used for material synthesis, annealing, sintering, semiconductor processing, powder metallurgy, nanomaterial preparation, and thermal stability testing in research and industrial applications...

 Open the catalog to page 4

All Labotemp Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.