1. Catalogs
  2. Labotemp Systems
  3. Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15

Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15
1 /5Pages

Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15

Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15
1 /5Pages

Catalog excerpts

Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15-1

Your Partner in Temperature Precision Tube Furnace 1700SC| 350 Mm Heating Zone FMT-15 www.labotemp.com | [email protected]

 Open the catalog to page 1
Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15-2

Labotemp High-Temperature Tube Furnace FMT-15 is a high-performance corundum tube furnace rated to 1700°C (working <1550°C). It features a f40 mm corundum tube, 350 mm heating zone and 1200 mm total tube length. MoSh heating rods, B-type thermocouple and PID control with 30-segment programming deliver ±1°C accuracy and ±5°C uniformity. Alumina ceramic-fiber chamber and 0-20°C/min ramp ensure stable, efficient operation. Manufactured by an experienced furnace manufacturer and supplied via authorised furnace suppliers, FMT-15 is suited to high-temperature synthesis, sintering, annealing, calcination...

 Open the catalog to page 2
Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15-4

Touch-Safe Design 1700°C maximum operating temperature PID automatic control via current limiting phase angle fired resistor 30 segments "time temperature curve" can be set arbitrarily The tube furnace uses high-purity quartz or alumina tubes as furnace tubes The furnace tubes are designed to be installed horizontally The temperature zone is designed to be single zone

 Open the catalog to page 4
Tube Furnace 1700°C | 350 Mm Heating Zone FMT-15-5

Your Partner in Temperature Precision 144 E, Midwest Avenue, Casper WY 82601, USA Website: www.labotemp.com | Email: [email protected]

 Open the catalog to page 5

All Labotemp Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.