Brandýská 8, 250 90 Jirny, Czech Republic tel:+420 281012550, [email protected], www.labox.eu MICROBIOLOGICAL SAFETY CABINET Fully automated operation controlled by microprocessor unit which ensures for optimal parameters of air flow within working space Monitoring of filters clogging, air flow velocity in the working space, air volume on the exhaus and residual number of days to calibration of MSC Display of operation time of germicidal UV radiator and filters Program supporting MSC decontamination by formaldehyde leakage index LI-C sterilizability index SI-C cleanability index CI-C Safe working area of the MSC is the whole working space inside work chamber of the cabinet behind removable exhaust grill. The cabinet is aimed for applications requiring laminar air flow to protect the product against particle and bacterial contamination and, simultaneously, requiring the personnel protection and the protection of environs against the influence of the product being processed. The case of the cabinet is made of sheet steel finished with baking powder enamel resistant against wear and disinfection means. Worktop and leakproof tray under the worktop are made of corrosion-resistant steel. During production of the cabinet, coat of the cabinet is tested, according to EN 12469:2000, for tightness. All materials used within inner space are insorptive and well decontaminable. The work chamber of the cabinet is fully lockable by slightly sloped splinterless safety glass (sash) preventing from reflections and allowing good view over the work chamber of the cabinet. The MSC works in modes that automatically adjust the case target parameters for the given activity: standby, operation and maintenance (cleaning, decontamination, service measurement). The mode is selected by a key on the control panel and is protected from intervention of any unauthorized person. Deviation from safe values is signaled acoustically and optically. Display of microprocessor unit informs of the operation status of the cabinet and shows the laminar flow velocity within the work chamber of the cabinet, pressure drop in the filters, operation time of installed filters, operation time of the UV irradiator, residual number of days to the last calibration of the MSC. The microprocessor unit is controlled through a simple interface. The interface allows to control the UV irradiator and to select the operation modes for cleaning, decontamination, service measurement or language selection on the display of the unit. DIMENSIONS External dimensions /mm/ width Width height Operating position of front window /mm/ Height of entry to work chamber with front window fully open /mm/

STANDARD EQUIPMENT Plain worktop with matte finish protecting against reflections. Slightly sloped, vertically sliding safety glass (sash); controlled by linear motors with programmable positions: Open, operating position, closed, cleaning position (enables glass cleaning from the inner side). Infrared optical barrier disallowing clench of hands when closing the safety glass. Two radial ventilators, controlled by microprocessor unit with respect to measured air flow through the cabinet. The unit compensates for increasing pressure resistance of filters when clogging. The initial state with clean...