BASE CABINETS STANDING/CUNTER HEIGHT Removable backs Flush Front Construction Full extension, ball bearing, plated drawer slides. Doors and drawer heads are “double pan” construction and sound deadened Adjustable doors with full access opening Stainless steel, 5 knuckle institutional type hinge - 13 ga. Full depth adjustable shelf Adjustable on 1" centers Removable bottom panned up to contain spills Standard pulls are flush, extruded aluminum with capability to be a label holder, or aluminum bar style pull. Additional Specifications All surfaces shall be painted or zinc plated. The paint is a...

CONTENTS ACCESSORIES ACID STORAGE CABINETS APRONS AND DRAWER HOUSINGS BASE CABINETS Base Cabinets - Sitting/Desk Height Sink Cabinets - Sitting/Desk Height FLAMMABLE STORAGE CABINETS FLOOR CASE UNITS Standing/Counter Height Sink/Fume Hood Standing Height Special Purpose Sitting/Desk Height FUME HOODS UTILITY TABLES WALL CASE UNITS

BASE CABINETS STANDING/COUNTER HEIGHT Standing/Counter Height 35" High x 22" Deep. Units are available in various widths as shown. Drawer units feature full extension slides. A single shelf is standard in the units shown. Additional shelves are available (see page 11). Specify left or right hand doors. Hand is indicated by side of door upon which hinge is located. Sample: Part Numbering System B3536-048 12233-456 1 = Base unit 2 = Height 3 = Width *"F” = File Drawer *"S” = Sink Unit *"P” = Panel *"R” = Right hinge facing cab. *"L” = Left hinge facing cab. 4 = #Doors 5 = #Drawers 6 = #Half Drawers...

BASE CABINETS STANDING/CUNTER HEIGHT

BASE CABINETS STANDING/COUNTER HEIGHT

BASE CABINETS STANDING/CUNTER HEIGHT

BASE CABINETS STANDING/COUNTER HEIGHT NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.

BASE CABINETS STANDING/CUNTER HEIGHT

BASE CABINETS STANDING/COUNTER HEIGHT NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.

SINK & FUME HOOD BASE CABINETS STAND UP HEIGHT ALSO AVAILABLE IN SITTING/DESK HEIGHT Sink Base B3518-10S(R) B3524-10S(R) Sink Base B3518-10S(R) Louvered B3524-10S(R) Louvered Sink Base B3518-10S(L) Louvered B3524-10S(L) Louvered Sink Island Base B3552-20SI B3558-20SI Sink Base B3530-20S Louvered B3536-20S Louvered B3542-20S Louvered B3548-20S Louvered B3552-20S Louvered B3558-20S Louvered Hood Island Base B3552-20PI B3558-20PI

BASE CABINETS SPECIAL PURPOSE BASES Typical Dimensions (SHOWN WITH OPTIONAL LAZY SUSAN INSTALLED) MOBILE BASES

ACID STORAGE CABINET Metal-Arc Acid Storage Cabinets are reinforced steel with a hi-tech performance polymer alloy coating. This reduces the possibilities of corrosion. Note: All Acid Cabinets are 18" deep. Add Suffix “VK” if Vent Kit is Required FLAMMABLE STORAGE CABINET Note: All Flammable Cabinets are 18" deep. Standard Shelf Standard base cabinet shelf with brackets. Available for 29" and 35" units. Pull-Out Shelf Optional pull-out shelf for base cabinets. Shelf is full extension with ball bearing slides. *Note: Cabinet door must be open 90 deg. to allow for extension. NOTE: When ordering...

BASE CABINETS SITTING/DESK HEIGHT Sitting/Desk Height 29" High X 22" Deep. Units are available in various widths as shown. Drawer units feature full extension slides. A single shelf is standard in the units where shown. Additional shelves are available (see page 11). Specify left or right hand doors. Hand is indicated by side of door upon which hinges are located. Part Numbering System Sample: 1= Base Unit 4= #Doors 2= Height 5= #Drawers 3= Width 6= #Half Drawers 7= Features * “F” = File Drawer * “S” = Sink Unit * “P” = Panel over door(s) * “R” = Right hinge facing cab. * “L” = Left hinge facing...

BASE CABINETS SITTING/DESK HEIGHT

BASE CABINETS SITTING/DESK HEIGHT

AIRFOIL PERCHLORIC ACID ASSEMBLIES Typical Dimensions (SHOWN WITH OPTIONAL LAZY SUSAN INSTALLED) CORNER SINK BASE CABINETS SITTING/DESK HEIGHT OPTIONAL LAZY SUSAN (FOR CORNER BASE CABINETS)

WALL CASE UNITS Wall cases are available in sizes ranging from 24", 31", 36" and 48" high and 18" wide to 48" wide. All units are 13" deep as standard. 24" high units have one shelf. 31" high to 36" high units have two shelves. 48" high units have three shelves. Additional shelves are available. On single hinge door units, specify (R) or (L) hinge. 48" high units have 3 hinges per door. Part Numbering System Sample: 1= Wall Case 4= #Doors 2= Height 5= Material of doors* 3= Width 6= Type of doors* * 7= Depth Note: 13" dp. standard, * Steel, Glass or no doors (open) 16" deep cabinets available...

WALL CASE UNITS CORNER WALL CASE UNITS NOTE: When ordering units with configurations that are non-standard, drawings must accompany order. NOTE: 16" deep corner wall case dimension = 28 11/16"

FLOOR CASE UNITS Floor cases are available in widths ranging from 18" to 48". All units are 84" high and are available in either 16" or 21 1/4" depths. Five shelves are standard equipment. Additional shelves are available. On 16" single hinge door units, specify (R) or (L) hinge. or 21 1/4" Part Numbering System Sample: 1= Floor Case 4= #Doors 2= Height 5= Material of doors* 3= Width 6= Type of doors* * 7= Depth * Steel Glass or no doors (open) * * Hinged, Sliding or Sliding/framed * “R” = Right hinge facing cabinet * “L” = Left hinge facing cabinet NOTE: When ordering units with configurations...

FLOOR CASE UNITS NOTE: When ordering units with configurations that are non-standard, drawings must accompany order.

FUME HOODS The name Labscape has long been synonymous with quality and longevity. Our newly redesigned fume hood line is a proud example of this reputation. Over 50 years of experience combined with state of the art engineering, manufacturing and testing facilities provide you with a fume hood unsurpassed in quality and performance. DESIGN The design of our fume hood line is founded on three basic principals: safety, flexibility and aesthetics. SAFETY Safety should be the number one concern when choosing a fume hood. That is why our hoods are tested and certified in accordance with the Ashrae...