Leaflet - english
2Pages

{{requestButtons}}

Catalog excerpts

Leaflet - english - 1

SIM-1 ECG HOLTER SIMULATOR The SIM-01 ECG HOLTER SIMULATOR is a device developed to demonstrate ECG Holter sytems and to replace the real patient. The device is able to simulate four different heart rates and four different amplitudes. Its most important function is to simulate ECG signals with normal sinus rhythm. However you can also set up noisy periods, too. You can easily check the actual setting of the simulator with the help of four pieces of two-colour LEDs. The simulator is a small, easy-to-use device with low power consumption offered at favorable price. Technical features: · Heart rates: 60, 90, 120, 150 bpm · Amplitudes: 0.5, 1, 2, 4 mV (peak-to-peak value of QRS) · Accuracy: · Heart rate: +/- 2% · Amplitude: +/- 10% · Output impedance: less, than 100 Ohm · Power supply: 2x1,2 V AA rechargeable batteries, min. 2000 mAh · Power consumption: less, than 4 mA · Operating time: 20 days by using 2000 mAh batteries · Size: 125 X 68 X 22 mm · Weight: 170g

Open the catalog to page 1
Leaflet - english - 2

SIM-1 ECG HOLTER SIMULATOR OPERATION MODES Operation mode Normal ECG Noisy ECG Long-term ECG ON/OFF ON ON ON RATE ON - AMPL ON Normal ECG: By pushing the ON/OFF button you start the normal ECG mode. In this mode the device plays sinus ECG signals. By pushing the AMPL and RATE buttons it is possible to set the amplitude and frequency of the ECG signals. LEDs are flashing in green colour. Noisy ECG: By pushing the ON/OFF and RATE buttons you start the noisy ECG mode. In this mode you can control the amplitude and frequency of the signals as you can do it in Normal ECG mode, but these signals...

Open the catalog to page 2

All Labtech catalogs and technical brochures

  1. EC-3H

    2 Pages

  2. EC-12R

    2 Pages

  3. EC-12H

    2 Pages

  4. EC-12RS

    2 Pages

  5. EC-12 Family

    5 Pages

  6. Holter

    4 Pages