PERME® VAC-V2 Gas Permeability Tester VAC-V2 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheeting, and aluminum foils. • Gas transmission rate, solubility coefficient, diffusion coefficient and permeability coefficient of the specimen could be obtained at one operation • 3 distinct or equivalent specimens could be tested individually with independent test results at one operation • Wide range and high precision temperature and humidity control to meet various test conditions • The instrument comes with two test modes: proportional mode and standard mode • Test range could be extended based on user requirements to test the materials with high permeability • Test results could be easily obtained even at extreme conditions by data fitting function, which could fit any temperature • The instrument could be used to test poisonous, inflammable, and explosive gases (customization required) • The instrument is controlled by a computer and test process is automatic • Reference film for fast calibration to ensure accurate and universal test data • Standard RS232 port for convenient data transfer • Support Lystem™ Lab Data Sharing System for uniform management of test results and test reports The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber. This test instrument conforms to the following standards: This test instrument is applicable to the determination of gas permeability of: Basic Including plastic films, plastic composite films, paper-plastic Applications composite films, geomembranes, coextruded films, aluminized films, Labthink Instruments Co., Ltd. 144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85062108 Labthink International, Inc. 200 River's Edge Drive, Medford, MA, 02155, U.S.A. Phone:+1-617-830-2190 FAX: +1-781-219-3638

aluminum foil, aluminum foil composite films, and many others Sheeting Including engineering plastics, rubber, and building materials, e.g. PP, Test the permeability of various types of gases, e.g. O2, CO2, N2, Air Various Gases Inflammable, Explosive Gases Test the permeability of various films to inflammable, explosive gases Biodegradable Films Test gas permeability of various sorts of biodegradable films, e.g. starch-based biodegradable bags Extended Applications Materials for Aerospace Usage Paper and Paper Board Paint Films Glass Fiber Cloth and Paper Soft Tube Materials for Cosmetics Rubber...

Port Size Instrument Size Standard Instrument, Constant Temperature Control Device, Professional Software, Round Sample Configurations Cutter, Vacuum Grease, Fast Quantitative Filter Paper and Vacuum Pump (Imported) Blades for Sample Cutter, Vacuum Grease, Vacuum Pump Oil, Fast Quantitative Filter Optional Parts 1. The gas supply port of the instrument is 06 mm PU Tubing; 2. Customers will need to prepare for gas supply. Labthink Instruments Co., Ltd. 144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85062108 Labthink International, Inc. 200 River's Edge Drive,...