& Accessories labwit Introductions: We offer a broad range of parts and accessories to lift your experience with Labwit equipment. Whether it is shaking trays, flask clamps, or spring pallets, we let you keep it real with Labwit genuine parts. Please take a few minutes to go through our pdf catalogs. Do not hesitate to contact us or your local authorized dealer for more details (For Shaking Incubators) • As a basic platform for all shaking equipments, shaking tray/s are included with the main units. Two trays are included with all double layer units. Extra shaking trays can be ordered separately if necessary. • All shaking trays are made of high quality materials, for example, the spray coated steel trays of floor shakers, and SUS304 stainless steel trays of all shaking incubators. • All shaking trays (except for ZWYR-D series and ZWYC-290A) are carefully perforated with standard holes distance intervals, which offers 100% flexibility for any attachment combinations on the shaking tray, for example, flask clamps, test tube racks, or 96 well plates, etc. • The shaking trays of ZWYR-D series and ZWYC-290A stackable shaking incubators feature threaded screw holes to fit with the specialized flask clamps with countersink screws. Universal Spring Pallet • Universal spring pallet is designed to offer most flexibility for holding uncommon vessels and containers by using springs to divide the pallet area into a number of small sections. • Available for most shakers, rockers and shaking incubators. • Each full size universal spring pallet has the same width and depth of the standard shaking tray of each model respectively. • Full size universal spring pallets can only be installed after the standard shaking tray is removed.

• Tube racks are available in stainless steel and ABS plastic. • P8010 stainless steel tube rack set contains one clamp holder and one stainless steel rack. With two adjusting knobs, the rack itself can be randomly fixed at 0-90 degree angles. It is available with different sizes of holes for various sizes of test tubes. While every tube rack has the same overall dimension, as 30x11x11cm. See the below detailed list of available sizes of tube racks. • P8011 ABS plastic tube rack set include a stainless steel clamp and an ABS plastic tube rack. The Labwit Sticky Mat is designed for attaching...

(For Incubators & Drying Ovens) • Anti-tilt design with high quality stainless steel Labwit quality assurance program demands the continuous assessment and improvement of all Labwit products. Information in this leaflet could thus change without notification and does not constitute a product specification. Please contact Labwit or their representatives if you require more details LABWIT Scientific Pty Ltd T :+61 403 838 963 W:www.labwit.com.au E: [email protected] ABN: 99155 819 980 All Rights Reserved.