This is a nanoDot with alphanumeric sensitivity code and serial number (DN091=0.91 sensitivity). Either the front or back of the carrier can face toward the radiation source during exposure nanoDot™ Dosimeter Patient Monitoring Solutions NanoDot dosimeters are designed for use in single point radiation assessment applications and are engineered to be read by the microSTAR®ii reader. The nanoDot offers complete reanalysis, requires no dosimeter preparation in the clinic and has a labeled sensitivity that is built into the dosimeter 2D bar code for rapid, accurate reading. Overview Regulatory authorities and experts agree that reducing radiation errors in medical imaging and radiation oncology is a priority, but there is little guidance on practical strategies. LANDAUER’s optically stimulated luminesence (OSL) technology, featuring nanoDot dosimeters and microSTARii readers, provides one universal, simple and flexible solution to this complex problem. Since 1998, OSL technology has been trusted to measure occupational radiation dose for millions of health care professionals across the globe. OSL dosimeters are used for occupational dose monitoring in more than 80% of hospitals in the United States and are the subject of more than 30 published, peer-reviewed scientific publications. LANDAUER’s nanoDot OSL-based medical dosimeter is an effective tool to independently verify the quantity of dose delivered from radiation producing devices in medical imaging and radiation oncology. It provides an inexpensive insurance policy to mitigate litigation risk for your facility. Technical specifications above reflect minimum expected performance when the microSTARii reader is operated in compliance with all LANDAUER recommended reader performance quality assurance protocols. Note: The data provided by this product is informational and for quality assurance control purpose. The output of the microSTARii is not used to adjust the dose to the patient.

The back of an open nanoDot carrier with 2D bar code that includes sensitivity code and serial number information Each nanoDot is shipped enclosed in a plastic packet ready for clinical use The nanoDot is a useful patient dosimetry verification tool Features and Benefits • Wide operating energy range (5 keV-20 MeV) makes nanoDots an ideal solution in multiple settings, including diagnostic radiology, nuclear medicine, interventional procedures, radiation oncology or any single point radiation measurement requirement1 • Complete reanalysis capabilities - Non-destructive readout allows for reanalysis...