Bone Regeneration Material • High phase purity • High stability in defect
Open the catalog to page 1PHYSICOCHEMICAL PARAMETERS: Composition: ß - tricalciumphosphate, Ca3(P04)2 Synthetic material - free of antigenic activity INDICATIONS: implantology, periodontology orthopeadics, traumatology • Filling of bone defects after extirpation • tumor-like lesions (unicameral bone cyst, aneurysmal bone cyst, bone • Treatment of periodontal defects gangliomas, fibrous dysplasia,...) • Remodelling of the alveolar ridge • pathological fractures with the • Treatment of bone defects around dental implants above-mentioned lesions • posttraumatic bone defects • Sinus lift (comminuted osteoporotic fractures...
Open the catalog to page 2CLINICAL APPLICATION SINUS LIFT PROCEDURE (LATERAL APPROACH) The sinus-lift operation is an effective method which enables the use of dental implants TREATMENT OF PERIODONTAL DEFECTS in locations without sufficient alveolar bone volume. PORESORB®-TCP is inserted into the space of the maxillary sinus where dental implant fixation is enabled by new bone tissue formation. 1 BEFORE OPERATION IMPLANT INSERTION DEFECT ISOLATION BY RESORBABLE MEMBRANE WINDOW CREATED IN THE FRONT SIDE OF THE MAXILLARY SINUS Treatment of intraalveolar defects (Periodontitis). Situation before and 6 months after treatment....
Open the catalog to page 3THE USE OF PORESORB®-TCP IN COMBINATION WITH THE PLATELET CONCENTRATE (PRP) FOR THE REGENERATION OF PERIODONTAL AND BONE TISSUES Regeneration of bone tissues at the place of periodontal defects depends on the presence and phenotypic expression of undifferentiated mesenchymal cells. Factors which stimulate these cells to regenerative activity can be obtained from the platelet concentrate (PRP) of the patient's blood. The combination of PORESORB®-TCP material with platelet concentrate results in a greater yield of bone tissue. No less important is its influence on the post-operative healing of...
Open the catalog to page 4CLINICAL APPLICATION CLINICAL APPLICATION OF PORESORB®-TCP / SINUS LIFT PROCEDURE (INTERNAL) Thanks to the high X-Ray contrast of the PORESORB®-TCP material, the process of resorption and bone tissue regeneration can be effectively monitored. The X-ray contrast becomes weaker as a result of the material's resorption and its replacement by bone tissue. The irregular polygonal shape of the granules ensures larger pore spaces and their lower immobility (high stability) in the defect. POST-TREATMENT SITUATION TWO YEARS AFTER LOADING OF IMPLANTS Histological examination of tissue removed during implantation...
Open the catalog to page 5ORTHOPAEDICS AND TRAUMATOLOGY PORESORB®-TCP may be applied either separately or in combination with autologous cancellous bone or autologous bone marrow. CLINICAL CASES DOCUMENTED BY X-RAY Preoperative X-ray image showing a large Operative approach from the anteromedi- Mixing of PORESORB®-TCP with autologous delineated defect in the proximal tibial meta- al side; 6 x 1.5 cm trepanation window was bone marrow immediately before the applica- physis, reaching up to the diaphysis. The cause distally extended during the surgery. Postoperative X-rays. The AP projection X-rays one month after surgery....
Open the catalog to page 6CLINICAL APPLICATION APPLICATION IN A BONE DEFECT WITH A PATOLOGICAL FRACTURE A large cyst at the boundary of metaphysis and The fracture was repositioned, while the The fracture is healed after one year, PORE- diaphysis of the humerus with a pathological defect was filled with PORESORB®-TCP and SORB®-TCP keeps reabsorbing, and a brightening bridged with a thin AO plate fixed by screws. is seen very well in the filling, especially at the medial side. APPLICATION OF PORESORB®-TCP IN HAND SURGERY Osteolytic defect, affecting the head and diaph- Following excochleation, the defect was filled After...
Open the catalog to page 7PORESORB®-TCP - SPECIFICATION: Grain size (mm): 0.16-0.3 Cat.No: 31:2 Grain size (mm): 0.3 - 0.6 Cat.No: 11:2 material is subject to a quality management system which is in accordance with ISO 9001:2000 and ISO 13485:2003. All LASAK products comply with the require- on the basis of the certificate of Notified Body No. 1014 of the European Union thus bear the CE marking. Grain size (mm): 1.0 - 2.0 Cat.No: 41:2 LITERATURE Internal sinus augmentation using porous resorbable calcium phosphate ceramic material; Evaluation of osteogenic activity of PORESORB-TCP in vitro; Nathanský Z., Strnad J., Veselý...
Open the catalog to page 852 Pages
2 Pages
8 Pages
5 Pages
28 Pages
4 Pages
4 Pages
30 Pages