1. Catalogs
  2. Lasering USA
  3. Slim Evolution II Pro

Slim Evolution II Pro

Slim Evolution II Pro

Slim Evolution II Pro

Product catalog summary
Product Overview:
The Slim Evolution II Pro is a 50W ENT CO₂ Laser designed for precision in medical procedures. It is adaptable to all surgical microscopes and features a working range of 250mm to 550mm with a minimum spot size of 125 microns.
Specifications:
  • CO₂ Laser Source: Wavelength of 10.6 micrometers, TEM00 mode structure, and a maximum divergence of 2 mrad.
  • Laser Configuration: Sealed-off with DC excitation mode.
  • Functioning Modes: Continuous Wave (CW), Pulser, and Superpulse.
  • Power Output: CW power adjustable from 1 to 50 W, Pulser with a duty cycle adjustable from 20 to 90%, and Superpulser with a peak power of up to 400 W.
  • Stability: +/- 5%.
  • Exposure Modes: Continuous, Single-pulse, and Repeat-pulse with exposure times from 50 to 1000 msec.
  • Pilot Beam: Wavelength of 635 nm, power less than 0.39 mW, and continuous operation mode.
Surgical Articulated Arm:
  • Maneuverability with 7 axes and a transmission efficiency of 85%.
  • Working radius of 160 cm and a rotation angle of 340 degrees.
User Interface:
  • TFT Monitor with 800x600 resolution and resistive touch screen.
  • Capability to store and recall setup files.
Optional Accessories:
  • Uvuloplasty Handpiece with Backstop.
  • Wave Guide Handpiece for nose and ear procedures.
See more

Catalog excerpts

Slim Evolution II Pro-1

Micro Spot ENT Micromanipulator Adaptable to all Surgical Microscopes Working Range 250mm to 550mm Minimum Spot Size 125 microns LA5ERINE usa Tel: 866-471-0469 info (5) laseringusa.com www.laseringusa.com

 Open the catalog to page 1
Slim Evolution II Pro-2

SLIM EVOLUTION II Pro - 50W ENT CO2 Laser OlA5bRINE USA SPECIFICATIONS CO2 LASER SOURCE WAVELENGTH MODE STRUCTURE DIVERGENCE (full angle) LASER CONFIGURATION EXCITATION MODE FUNCTIONING MODE POWER STABILITY EXPOSURE MODE EXPOSURE TIME PILOT BEAM USER INTERFACE 10.6 micrometers TEM00 Prevalent 2 mrad (max) Sealed-off DC CW, Pulser, Superpulse CW: 1 - 50 W (CW) to tissue continuously adjustable - 1 - 9.5 W, step: 0.5 W - 10 - 50 W, step: 1 W PULSER: Duty cycle continuously adjustable: 20 to 90%, step 5%, average power: 8 - 40 W to tissue SUPERPULSER: Peak power: max 400 W Average power: 1 - 20...

 Open the catalog to page 2

All Lasering USA catalogs and technical brochures

  1. Venezia Lift

    2  Pages

  2. ACCU-Beam®

    2  Pages

  3. Velure S9

    4  Pages

  4. Velure S5

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.