Instrument Profile The MSX432 is designed for sectioning large samples of high-alloy and hardened materials. Pulse sectioning (short contact times per stroke), coupled with intense cooling, provide excellent results. Exhaust port for venting 4.75 in (120 mm) OD Sealed electronic closure Optional laser pointer 25 hp (18.5 kW) motor with integrated mechanical brake Supports up to 17 in (~432 mm) blade 18.9 in (480 mm) x 17.70 in (449 mm) T-slotted table with large sectioning compartment for versatile sample fixturing Side access port for long sections Manually adjustable Y-table with 4.72 in (119.9 mm) of travel for sample position and parallel sections Convenient easy-to-operate control panel Automatic pulse feed rate with load control maximizes sectioning efficiency without overheating samples Dual joystick control for blade direction (Z-axis); table direction (X-axis); oscilation, pulse, and manual sectioning EMPOWERING RESULTS

Cutting Wheel Motor with Electronic Brake Cutting Wheel Dimensions Minimum Maximum Cutting Wheel Speed Sample Feeding Speed Sample Feeding Speed Table Sample Feeding Speed Cutting Wheel Table Oscillation Speed Minimum Speed Maximum Speed, Rapid Traverse T-Slot Table Dimensions Width Depth (5) T-Slots Cutting Wheel Clearance Above Table Blade Travel (Z-Axis) Table Travel (X-Axis) Y-Table Travel (Y-Axis) Sample Measurement Maximum Height Maximum Width Maximum Depth Max. Cutting Area of Sample Round Rectangular Longitudinal Cut Coolant Reservoir Capacity Coolant Flush Pump Maximum Interior Lamp...