

Catalog excerpts

Plant Growth/Germination Cabinets LEEC A-PDF Split DEMO Plant growth and germination cabinets are based on the cooled incubators detailed on pages 13 and 14. Day and night conditions are automatically simulated and can be easily programmed. Temperature Control All plant growth cabinets use the same temperature control systems as the cooled incubators on which they are based. Temperature performance can be marginally affected during the “lights on” cycle due to a small amount of heat from the lights radiating into the growth chamber. The temperature is cycled using a 24 hour timer. Chart recorder. Audible alarm. Humidity control. Remote alarm contacts. Additional light available by quotation. Illumination All models are fitted with a digital 24 hour timer to control the day/night cycle of lights on and off. Each incubator door is fitted with one pair of white fluorescent tubes. These give a lighting intensity of approximately 3000 lux on each shelf. For higher lighting intensities and specialised applications, extra lights or UV lamps can be added. All lights are mounted in the outer door which is vented at the top and bottom. This means that the unwanted heat can escape into the laboratory. Cabinets fitted with four or more lights in each door also have a small extract fan in the door to help remove heat. This helps to maintain stable control, especially at lower operating temperatures. High Humidity Models Two models (SL2 & SL3) are sealed chamber versions of models PL2 and PL3 respectively and should be used for high humidity applications. Specification Models Temperature* Range (Lights off) Range (Lights on) Control (Lights off) Variation (LIghts off) Refrigerant 0°C to +60°C +5°C to +60°C Typically ±0.2°C* Typically ±0.5°C* R12 or CFC -free Digital 24 hour as standard, (7 day alternative if specified) Timers for Cycling Construction Chamber Exterior Castors Access Port Insulation Chamber Capacity (litres) Stainless steel White painted steel Optional Standard, 2 x 12mm CFC-free Stainless steel Stainless steel Standard, lockable Standard, 12mm Foamed in place Shelves Supplied *Temperature specification for Models PL2 & SL2 at
Open the catalog to page 1All LEEC catalogs and technical brochures
-
Post Mortem Table
2 Pages
-
Cremator Charger
4 Pages
-
PST 65
2 Pages
-
P33
1 Pages
-
TOUCH T190, T190S
12 Pages
-
embalming station
1 Pages
-
Lightweight Stretchers
1 Pages
-
Coffin Bier
1 Pages
-
Stretcher Covers
1 Pages
-
Combination Stretchers
1 Pages
-
First Call One Man Loader
1 Pages
-
Multilevel Removal Trolley
1 Pages
-
Hydraulic Stacking Trolley
2 Pages
-
Mobile Instrument Trolley
2 Pages
-
Low Loading Trolley
2 Pages
-
Refrigerated Body Storage
1 Pages
-
Mortuary Trays
1 Pages
-
Body Identification System
2 Pages
-
LEEC RCS
2 Pages
-
Autopsy solid top Pedestal
1 Pages
-
Dissecting trolley
2 Pages
-
Ventilated Specimen Stores
6 Pages
-
Ultrasonic Humidity Cabinets
2 Pages
-
LEEC Precision Incubator
1 Pages
-
Research CO2 Incubators
2 Pages
-
Viewing Trolley
1 Pages
-
LEEC Autopsy tables brochure
1 Pages
-
Foetal Storage
1 Pages
-
Hydraulic Stacking Trollet
2 Pages
-
Hydraulic Embalming Trolley
2 Pages
-
Mobile Racking
1 Pages
-
Body Storage Trays
1 Pages
-
Lift Assist brouchure.
2 Pages
-
LEEC Easy Fit Cool Zone
2 Pages
-
Warming Cabinets
2 Pages
-
Drying Cabinet
2 Pages
-
Classic Incubator brochure
2 Pages