Catalogs >
LEEC >
LEEC Precision Incubator

LEEC Precision Incubator
1 / 1Pages

Catalog excerpts

Precision Range Standard Features • Overtemperature safety cutout is • Overtem pe rat u re vi sual warn i ng. • Large LED digital display. • High quality stainless steel • CFC-free insulation. • Toughened inner glass doors. Optional Extras The Precision Incubator Range combine traditional styling with • Chart recorder. modern controls for advanced temperature control. • Audible alarm. All precision incubators have stainless steel chambers, adjustable shelves and a toughened inner glass viewing door. The outer cabinet is rust-resistant and finished in white paint. Two 12mm access ports are provided so that cables for shakers or monitoring probes can be passed into the incubator. The heating mat has a profiled element to eliminate all 'hot-spots'. Polyurethane insulation is foamed in situ to help ensure optimum temperature control. Opera- tion of the incubator at or below room temperature can be achieved when the cooling coil is connected to a source of chilled water (eg Model C3 recirculating Temperature Control All models have gentle fan-assisted air circulation via full-width ducts to ensure optimum temperature stability throughout the chamber. When the incubator door is opened, the fan stops so that any heat loss is kept to a minimum. The microprocessor PID temperature controller maintains the set temperature to - within 0.1 CC. The easv to use. tanriDer within 0.1 CC. The easy to use, tamper proof temperature controller shows both 'set' and 'measured' values. Indicator lamps show when the heater condition exists. The independent overtemperature safety cutout is easily Dual temperature cycling between two preset temperatures is an optional extra 'Temperature up to+9QcC to special order. Order ref: /H Control near or below ambient requires a recirculatin

Open the catalog to page 1