EM RAPID Pharmaceutical Milling System for Pills

PHARMACEUTICAL SURFACE PREPARATION 170.0 150 The EM RAPID milling system has been designed for preparation of pills and tablets prior to investigation with NIR spectrophotometry for Research on Active Pharmaceutical Ingredient Dispersal. With a tungsten carbide or diamond milling tool, pills can be decapsulated and milled without any smearing effect caused by the pills’ coating. The operating concept of the EM RAPID offers versatile features which are directly converted into user benefits to achieve maximum ease of use and optimal results. Features >> Decapsulation of pills without smearing effect...

FLEXIBLE SETUP , QUALITY RESULTS, HIGH THROUGHPUT Perpendicular view showing graticule for distance definition - optional Processing observation Front face observation

FAST AND SAFE EM RAPID The milling tool and the sample are located under a protective cover. The instrument will not run until the cover is closed or stops quickly if the cover is opened during milling. The miller ON/OFF switch is integrated into the control lever for the milling action. Hazardous dust of API material is drawn into a low-noise extraction unit fitted with a Hepa-filter. This filtration system is silent and safe. Control lever with integrated ON/OFF switch Low noise extraction and filtration unit fitted with a Hepa-filter Specially designed pill holder Single pill holder A specially...

Protective cover Exhaust tube connection connects with the extraction and filtration unit Multiple pill holder For preparation and investigation of several tablets at once, a smart designed glass slide holder increases throughput considerably, allowing more than one pill to be milled simultaneously.

Provided functions 1 Milling speed (rpm) on LCD display. 2 Miller total feed advance on LCD display. 3 Variable cutting speed between 300-20000 rpm allows settings to be adjusted for fragile pills. 4 Clear total feed advance to set starting point for defined layer removal of the pill. 5 Hold advance indication while the miller has been retracted without losing milling position information. 6 ON/OFF, brightness and segment control of the ring LED illumination. 7 The Auto-Feed function allows safe and fast layer removal without operating the feed hand wheel. Two switch positions are selectable...

Integrated viewing system EM RAPID ergonomic M50 stereo outfit With the specimen pivot arm the sample can be observed during preparation at an angle between 0° and 60°, directly onto the front face and 90° to the front face for distance determination with the eyepiece graticule (optional). The EM RAPID features brilliant LED top light ring-illumination and optimized backlighting for excellent viewing. By moving the control lever up and down the milling action is performed with the pre-selected step advance of the miller using the ergonomic positioned hand wheel. The EM RAPID can be ergonomically...

Copyright © by Leica Microsystems CMS GmbH, Wetzlar, Germany, 2017 · Subject to modifications LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH. Leica Microsystems CMS GmbH | Ernst-Leitz-Strasse 17–37 | D-35578 Wetzlar (Germany) Tel. +49 (0) 6441 29-0 | F +49 (0) 6441 29-2599