Special Line vario S 48W

1 / 3 PagesView full catalog

Special Line vario S 48W

Product catalog summary

Specifications:

Articulated arm with two gas springs for easy and continuous adjustment without screws or wing nuts.
Luminaire head remains parallel to the table and is mechanically adjustable in slope.
Light distribution is wide and symmetric with high-lustre anodized reflectors for direct lighting.
Electronic LED-driver with dimming range from 1% to 100%.
Power supply via a 3m cable with Schuko-plug, 220-240V~/50-60Hz.
LED cover includes a microprism screen and a bi-functional diffusor foil for different diffusion levels.
Multi-functional push button switch located on the lateral lighting head.
Power consumption is 48W with an LED lifetime of up to 50,000 hours.
Protection class IP20.
Weight approximately 6.6 kg.

Technical Data:

Model: Special Line vario S 48W.
Features two rows of LED-modules providing powerful light at the working area.
96 daylight white "full-spectrum" MidPower LEDs with a color temperature of approximately 5700K.
High color rendition with CRI > 90 (typical 93).
Continuously dimmable and flicker-free with memory function.
Microprismatic screen and high-tech diffusor foil provide glare-free and shadow-free light.
No UV or infrared light emission, preventing untimely hardening of synthetic materials.
No heat emission towards the light, keeping the working area cool.

Dimming Function:

Controlled by a multi-functional push-button on the lamp head.
Quick key press (<0.5s) to switch light on or off.
Long key press (>0.5s) to dim up or down, with each press changing the dimming direction.

Light Properties:

Illuminance at the working area varies with distance: 50cm up to 7000 Lux, 45cm up to 7800 Lux, 40cm >9000 Lux.

Arm Variations:

Lower arm can be shortened by 15cm for high board mounting.
Upper arm can be shortened by 10cm for low table depth.
Alternatively, lower arm can be fixed with a 17° forward incline.

Design:

Flat lighting body made of extruded aluminum profile with laser-cut end caps.
Dimensions: luminaire head 586 x 215 x 35.5 mm.
Color: Luminaire head natural anodized, other parts silver-grey RAL 9006.

Mounting Options:

Includes screwdown flange, table clamps, table base vario, and wall angle.
Recommended mounting for dental workstations.

Dimming Converter Modes:

Mode 1: Default setting where the last dimming value is retained after power off.
Mode 2: Allows setting a reference value via double-click, which can be manually overridden.

Catalog excerpts

Special Line vario S 48W Motion display using the RMD vario S 55/2 as an example Technical data Light distribution wide – symmetric high-lustre anodized reflectors, direct lighting Control gear electronic LED-driver, dimming range 1 – 100% Mains lead approx. 3m cable H03VV-FG0,75 with Schuko-plug, 220-240V~/50-60Hz microprism screen + bi-functional diffusor foil (turnable for 2 different degrees of diffusion) multi-functional push button switch in the lateral lighting head Protection class gas pressure springs integrated in the upper and lower articulated arms Profile • Innovative articulated arm with two gas springs. • Easily and continuously adjustable thanks to integral gas pressure springs without the need for opening any screw or wing nut. • The luminaire head stays always parallel to the table (parallelogram arm) and is mechanically adjustable in slope.

Open the catalog to page 1

• Arm-variations: • lower arm alternatively 15cm shortened for mounting on high boards • if required, upper arm can be shortened 10 cm (e.g. in case of low table depth) • alternatively, lower arm fixed, 17° forward inclined • Well-shaped, flat lighting body made of extruded aluminum profile with laser-cut end caps. • Dimensions: luminaire head 586 x 215 x 35,5 mm • Colour: Luminaire head natural anodized, other parts silver-grey painting RAL 9006 Light properties Illuminance at the working area: Measuring distance CRI: Colour rendering index CCT: correlated colour temperature • Very powerful...

Open the catalog to page 2

MODUS 1: Der Einschaltwert ist immer der letzte Dimmwert vor dem Ausschalten (oder z.B. nach Stromausfall) - Dies ist die werksseitige Standardeinstellung MODUS 2: Der Einschaltwert ist der durch Taster-Doppelklick (bei eingeschalteter Lampe) gespeicherte Wert à (2x drücken innerhalb von 0,4s). Dieser Referenzwert kann jederzeit durch langen Tastendruck manuell übersteuert werden. Löschen des Referenzwertes durch Taster-Doppelklick bei ausgeschalteter Lampe, dadurch Rückkehr zu MODUS 1. Mounting brackets • Picture 1: screwdown flange 60 x 60 mm (incl.) • Picture 2: table clamps with a span of...

Open the catalog to page 3

Special Line vario S 48W

Special Line vario S 48W

Catalog excerpts

All Lichttechnik Rolf Meier catalogs and technical brochures