Introduction
LifeAire Systems, a leader in air purification technologies, has developed the Aire~VOC module specifically for VOC remediation in life science laboratories. This product is derived from the AIRE~IVF® system and is designed to improve embryogenesis by capturing and neutralizing VOCs.

Product Specifications
The Aire~VOC module is available in three standard sizes, each designed to replace a section of existing ductwork. The sizes and their corresponding service areas are as follows:

• Aire~VOC™ 1000: Serves approximately 356 square feet (33.1 square meters) with a static pressure of 0.78” w.g.
• Aire~VOC™ 2000: Serves approximately 712 square feet (66.1 square meters) with a static pressure of 0.78” w.g.
• Aire~VOC™ 4000: Serves approximately 1,425 square feet (132.4 square meters) with a static pressure of 2.37” w.g.

Installation and Compatibility
The Aire~VOC module is easy to install, requiring only the replacement of a section of existing ductwork. It is suitable for laboratories with physical building constraints, leasehold restrictions, or engineering complexities.

Performance and Benefits
By integrating the Aire~VOC module, IVF programs have reported double-digit improvements in pregnancy rates, highlighting the effectiveness of the technology in enhancing laboratory environments.

Contact Information
For more information, LifeAire Systems can be contacted at 484.224.3042 or via email at [email protected]. Additional details are available on their website, lifeaire.com.