Stairs and lift in one The FlexStep is the perfect solution to conquer split levels for all wheelchair users and walkingimpaired persons in areas with minimal space. It’s the most space-saving lift on the market and at the same time it offers a design to satisfy even the most fastidious user. Design No effort has been spared on the details, and the design offers good opportunities for adaptation to the surrounding architecture and fittings. The FlexStep comes as standard in painted steel, but steps and handrails can be fully adjusted to the client’s needs. It is supplied for both indoor and outdoor use. Equal opportunities for all! In daily use the FlexStep is a completely ordinary stair with a classic design, which can to a great degree be adjusted to individual requirements. With a single press of a button the FlexStep transforms into a lift, which comfortably and safely raises the user to the upper level. Safety – first and foremost! The lift is fitted with all conceivable safety measures. Anti-roll-off, antisqueezing, fall risk, malfunction etc. If only one of the inlaid safety sensors is activated the lift stops immediately and an alarm sounds. Technology The lift is fitted with lifting columns which, thanks to advanced controls, operate 100% synchronously, so the user feels an even and comfortable lift. Furthermore, the lift is fitted with a specially-developed safety circuit, which contains, among other things, an infrared safety system, which monitors that no injury is caused by squeezing between the steps. Function Operation is especially easy for the single user. At the top and bottom of the stairs the lift is called and the user can operate the upward and downward movement on the lift itself. All other actions, including the key safety functions, go on automatically thanks to the advanced controls. Once the FlexStep has been used as a lift, it will automatically return to the starting position as stairs after 1 minute without use. Assembly The FlexStep can be fitted without changing the existing structural elements and replaces not only the normal stairs, but also the already used sidemounted lift systems or other lifting appliances. The only preparation at the set-up site is providing a 230V power supply. New version (V2) lifting capacity up to 400 kg. Both indoor and outdoor use No risk of squeezing from use No structural alterations are necessary, just a level floor Liftup A/S | Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: [email protected] | www.liftup.dk | CVR DK-1015

FlexStep with fixed stairs FlexStep fitted in a narrow passageway REFERENCES Christiansborg, Copenhagen Liftup has supplied the Danish Parliament building at Christiansborg with four FlexSteps. The first lift is a part of the entrance to the Common Hall. The stair planks from the original stairs could be reused, thus retaining the original look. FlexStep (V2) Technical Specifications:  EU-Parliament, Brussels One of Liftup’s most prestigious projects was certainly the installation of 10 FlexSteps in the European Parliament’s buildings in Brussels. Thanks to, among other things, the simple integration...