1. Catalogs
  2. LIGHT PROGRESS
  3. UV - DIRECT - K - NX

UV - DIRECT - K - NX

UV - DIRECT - K - NX

UV - DIRECT - K - NX

Product catalog summary
Introduction to UV-C Rays
Light can be divided into visible, infra-red, and ultraviolet rays. Ultraviolet rays are further classified into UV-A, UV-B, and UV-C. UV-C rays have germicidal properties that destroy the DNA of microorganisms, preventing their growth and proliferation. UVGI technology, which uses UV-C rays, is an effective disinfection method that does not create resistance in microorganisms.

UV-DIRECT-K-NX System
The UV-DIRECT-K-NX is a UV-C system designed for direct radiation in false ceilings, providing deep air and surface disinfection. It is particularly useful in healthcare and pharmaceutical environments where high hygiene standards are required. The system operates without heat, liquids, or contraindications, and can be used safely during work breaks when staff are not present.

Benefits and Applications
The UV-DIRECT-K-NX system achieves a 99% elimination rate of various bacteria, including Bacillus, Coli, Clostridium, and others, within minutes. It offers a safer and more environmentally friendly alternative to chemical disinfectants, which can be hazardous and costly.

Technical Features
The system includes a UV-C selective lamp with a peak emission of 253.7 nm, made from very pure quartz and ozone-free. It features a stainless steel structure, electronic ballast, and a protective grid for the UV-C bulb. The system can be equipped with a control board for operational management, including automatic on-off cycles and security checks.

Conclusion
Manufactured in Italy, the UV-DIRECT-K-NX is a high-quality, durable disinfection solution that requires minimal maintenance, aside from periodic lamp replacement. It is suitable for various environments, ensuring a high level of hygiene and safety.
See more

Catalog excerpts

UV - DIRECT - K - NX-1

UV - DIRECT - K - NX UV-C system with direct radiation in false-ceiling UV-DIRECT-K-NX allows deep air and surface disinfection in any type of environment. Traditional cleaning methods are, often, not sufficient Light in a broad sense can be divided in visible, to ensure high levels of hygiene, which can be achieved only by the use infra-red and ultraviolet rays. Ultra-violet rays (invisible) can be classified in: As a matter of fact, in the health and pharmaceutical sector, all the UV - A (with tanning properties) environments need to be disinfected to keep hygiene standards high. UV - B (with therapeutic properties) With UV-DIRECT-K-NX, it is possible to perform a deeper disinfection of UV – C (with germicidal properties) all the rooms, in a simple, immediate and safe way, without developing heat, without using liquids and without any contraindications or The germicidal effects of the UV-C radiation destroy DNA of Bacteria, Viruses, Spores, Fungi, UV-DIRECT-K-NX is equipped with a UV-C lamp, and it applies as a common ceiling fixture. The device can be switched on during work Moulds and Mites avoiding their growth and proliferation. breaks, always when the staff is not present, so it radiates surfaces, which are then disinfected. In environments, the natural recirculation UVGI technology is a physic disinfection method of the currents also allows air treatment, which, purified by the with a great cost/benefits ratio, it's ecological, microbial load, creates a perfect and healthy environment. and, unlike chemicals, it works against every It is shown that the control and the increase of hygiene level allows a microorganisms without creating any resistance. consequent and general increase in quality both in healthcare facilities but also in pharmaceutical sector, in microbiological laboratories, etc. The disinfection level with UV-DIRECT-K-NX achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation. High disinfection levels of UV-DIRECT-K-NX can be otherwise achieved, but only with chemicals, hazardous to health and harmful to the environment, as well as costly. Application in an industrial environment

 Open the catalog to page 1
UV - DIRECT - K - NX-2

TECHNICAL FEATURES - Light Progress UV-C selective lamp (emission peak 253.7 nm.) with high output, ozone free, very pure quartz. - Structure in AISI 304 stainless steel. - All materials are tested to resist to intense UV-C rays. - Power supply with electronic ballast specific for Light Progress UV-C lamps - AISI 304 stainless steel grid to protect the UV-C bulb. - Ability to handle ON-OFF cycles in an automatic and programmable manner (by adding an optional control panel) - CE marking (LVD - EMC - MD - RoHS). UV - DIRECT perfect hygiene level UV-DIRECT-K-NX series with direct radiation includes...

 Open the catalog to page 2

All LIGHT PROGRESS catalogs and technical brochures

  1. STET CUBE

    2  Pages

  2. STET CLEAN

    2  Pages

  3. UV-BOX

    2  Pages

  4. UV-BOX-R

    2  Pages

  5. UV-FAN HEALTH

    2  Pages

  6. UV - CABINET

    2  Pages

  7. UV - BOX

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.