UV - FLOW - C unidirectional flow UV-C system The UV-FLOW series includes UV-C ultraviolet germicidal devices with unidirectional flow. The UV-FLOW is used for creating UV germ protection barriers to be WHAT ARE UV-C RAYS? Light in a broad sense can be divided in visible, infra-red and ultraviolet rays. placed above the doors of the premises with contamination control or Ultra-violet rays (invisible) can be classified in: even for the treatment of air upper layers in the environment and in UV - A (with tanning properties) closed premises. UV - B (with therapeutic properties) UV – C (with germicidal properties) The use of UV-FLOW allows an intensive air disinfection, essential in all health and pharmaceutical environments, where it is necessary to operate in optimal microbiological conditions. The germicidal effects of the UV-C radiation In the health sector, it is recommended to create a decontamination destroy DNA of Bacteria, Viruses, Spores, Fungi, area between two different areas, especially if one of them is to be kept Moulds and Mites avoiding their growth and under strict microbiological control. The mold spores and bacteria, freely circulating among spaces, are destroyed by the UV-C rays; this avoids the possibility that they settle on the surfaces. UVGI technology is a physic disinfection method Traditional cleaning methods are, often, not sufficient to ensure with a great cost/benefits ratio, it's ecological, high levels of hygiene, which can be achieved only by the use of UV-C and, unlike chemicals, it works against every microorganisms without creating any resistance. With UV-FLOW, it is possible to create a bactericidal barrier between "grey" and "white" areas in a simple, immediate and secure manner, or treat the air in general, without developing heat, without chemicals and without any contraindications. It is shown that the control and an increased of hygiene level allows a consequent and general increase in quality both in the health and pharmaceutical sector, in microbiological laboratories, etc. Contaminated Air Aria contaminata UV-FLOW achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation. Disinfection of air upper layers Purified air Aria Purificata

TECHNICAL FEATURES - UV-C Light Progress selective lamp (emission peak 253.7 nm.) with high output, ozone free, very pure quartz. - Structure in AISI 304 stainless steel. - All materials are tested to resist to intense UV-C rays. - Dust and water resistant (IP 55). -Power supply with electronic ballast specific for Light Progress UV-C lamps Application example - Honeycomb one-way black filter. - CE marking (LVD - EMC - MD - RoHS). UV - FLOW disinfection barrier UV-FLOW series includes the possibility to choose among unidirectional flow devices, different according to the UV-C lamp powers. UV-FLOW...