→→ Product sheet, specialty gas REDLINE® cylinder regulators C 200/2. Two-stage regulator. C 200/2 is a two-stage regulator made especially for the high demands on purity, safety and tightness that are necessary for specialty gases. Two-stage regulators are preferred when a very stable secondary pressure is necessary and the primary pressure varies. C 200/2 can be stand-alone or equipped with a shut-off valve (type A), a metering valve (type B) or equipped for purging of the high pressure side (type P). Product name C 200/2, brass C 200/2, brass C 200/2, brass C 200/2, stainless steel C 200/2, stainless steel C 200/2, stainless steel C 200/2 A, brass C 200/2 A, brass C 200/2 A, brass C 200/2 A, stainless steel C 200/2 A, stainless steel C 200/2 A, stainless steel C 200/2 B, brass C 200/2 B, brass C 200/2 B, brass C 200/2 B, stainless steel C 200/2 B, stainless steel C 200/2 B, stainless steel C 200/2 P, brass C 200/2 P, brass C 200/2 P, brass C 200/2 P, stainless steel C 200/2 P, stainless steel C 200/2 P, stainless steel REDLINE® and HIQ® are registered trademarks of The Linde Group.

→→ REDLINE® cylinder regulators C 200/2. Two-stage regulator. Technical data Primary pressure Outlet pressure 7–230 bar 100–3,300 psi 0.2–3 bar 3–45 psi 0.5–6 bar 8–85 psi 1–10 bar 15–150 psi –1–5 bar –14.5–75 psi –1–10 bar –14.5–145 psi –1–18 bar –14.5–260 psi When the inlet pressure drops by 10 bar, 145 psi, the outlet pressure rises by less than 0.01 bar, 0.1 psi. Out = NPT ¼" female –40 – +122 °F –40 – +50 °C 6.6 lb 3.0 kg Outlet gauge range Stability Connection Operating temperature Weight Material: –– Housing –– Seals –– Membrane –– Seating Flow curve Stainless steel 316L PCTFE Brass, Ni/Cr...

→→ REDLINE® cylinder regulators C 200/2. Two-stage regulator. Linde AG Linde Gases Division, Seitnerstrasse 70, 82049 Pullach, Germany Phone +49.89.7446-1661, Fax +49.89.7446-2071, [email protected], http://hiq.linde-gas.com