→ Product sheet, specialty gas REDLINE® gas panel A 308. Semi-automatic gas panel. Single-stage, semi-automatic gas supply panel with internal gas purging, designed for high-purity gases and mixtures. Gas panel A 308 is a semi-automatic gas panel designed for uninterrupted gas supply. Switch-over between the two connected cylinders or bundles occurs when the pressure of one side (the primary side) falls below a preset pressure level of the secondary side. This is achieved through two integrated regulators (operator can set two slightly different pressure levels on the left side regulator to decide which side starts the operation) which are connected at their outlet ports. The panel can also be equipped with inductive contact gauges (/C models) for automatic inlet pressure monitoring. → Continuous supply of pure gases → Semi-automatic switch-over without auxiliary power → The high pressure gauges (contact gauges optional) indicate the cylinder in use and the cylinder in standby. In addition, the actuating lever of the adjustable regulator points towards the cylinder that is active (being emptied) → Compact design (to fit safety cabinets) → Horizontal extensions 2x2, 3x2, 4x2 REDLINE® and HIQ® are registered trademarks of The

→→ REDLINE® gas panel A 308. Semi-automatic gas panel. Technical data Inlet primary pressure Outlet pressure 300 bar 14 +/– 2 bar 50 +/– 8 bar –20 – +70°C 2x2 or 2x4 cylinders NPT 1/4" female NPT 1/4" female NPT 1/4" female Housing brass, Ni/Cr plated PCTFE Hastelloy® Operating temperature Connection Process gas in Process gas out Purge gas outlet Material Seat seal Membrane Flow curve Flow chart * Set pressure, ** Set pressure backup Process gas inlet (plugged) Process gas inlet Regulator Shut off (plugged) fix Relief valve Process inlet NPT 1/4" f (plugged) Process inlet NPT 1/4" f (plugged)...

→→ REDLINE® gas panel A 308. Semi-automatic gas panel. A 308 long flexihose and 2 cylinders psi 200 725 A 308 coil and 2 cylinders Specifications bar B C2 14 B C2 50 A 308 long flexihose and 8 cylinders HIQ code 7584 7585 A 308 coil and 8 cylinders Specifications bar B C8 14 B C8 50 A 308 long flexihose and 4 cylinders A 308 coil and 4 cylinders Specifications bar B C4 14 B C4 50 A 308/C contact gauge HIQ code 7586 7587 A 308 short flexihose and 2 cylinders A 308/C contact gauge, coil and 2 cylinders A 308 short flexihose and 4 cylinders A 308/C contact gauge, coil and 4 cylinders A 308/C contact...