REDLINE® Points of use B 40
REDLINE® Points of use B 40
The REDLINE® Points of Use B 40 is designed for specialty gases requiring high purity, tightness, and safety. It is intended for bench mounting, such as on a laboratory desk, with a gas supply line from below through the table stand. Design F includes a fixed pressure and flow meter.
Product Variants
- B 40 A: Available in brass and stainless steel, with no specified pressure range.
- B 40 B: Available in brass and stainless steel, with pressure ranges of 0.1–1 bar (1.5–15 psi), 0.5–6 bar (8–85 psi), and 1–10.5 bar (15–150 psi).
- B 40 C: Similar to B 40 B, available in both materials with the same pressure ranges.
- B 40 F: Available in brass and stainless steel, with a fixed pressure of 3 bar (45 psi).
Technical Specifications
- Max Primary Pressure: 40 bar (550 psi)
- Secondary Pressure Options: 0.1–1 bar (1.5–15 psi), 0.5–6 bar (8–85 psi), 1–10.5 bar (15–150 psi)
- Pressure Gauge Scale: Ranges from –1 to 18 bar (–14.5 to 260 psi)
- Max Flow (Nitrogen): 2 Nm³/h (700 SCFH), 6 Nm³/h (2,100 SCFH), 11 Nm³/h (3,850 SCFH)
- Materials: Brass, Ni/Cr plated, and Stainless Steel 316L
- Operating Temperature: –20 to +70°C (–4 to +158°F)
Contact Information
Linde AG, Linde Gases Division, Seitnerstrasse 70, D-82049 Pullach, Germany. Phone: +49.89.74 46 1661, Fax: +49.89.74 46-2071, Email: [email protected], Website: hiq.linde-gas.com
Catalog excerpts
3 Product sheet, Specialty gas REDLINE® Points of use B 40. Bench design. The point of use is especially developed for specialty gases with high demands of purity, tightness and safety. The point of use is intended for mounting on a bench e.g. a laboratory desk, with a gas supply line from below through the table stand. Design F is a version with fixed pressure and flow meter. Product name B 40 A, brass B 40 A, stainless steel B 40 B, brass B 40 B, brass B 40 B, brass B 40 B, stainless steel B 40 B, stainless steel B 40 B, stainless steel B 40 C, brass B 40 C, brass B 40 C, brass B 40 C, stainless steel B 40 C, stainless steel B 40 C, stainless steel B 40 F, brass B 40 F, stainless steel ® HiQ and REDLINE are registered trademarks of The Linde Group.
Open the catalog to page 1
3 REDLINE® Points of use B 40. Bench design. Technical data Max primary pressure Secondary pressure Pressure gauge scale Material Operating temperature Linde AG Linde Gases Division, Seitnerstrasse 70, D-82049 Pullach, Germany Phone +49.89.74 46 1661, Fax +49.89.74 46-2071, e-mail: [email protected], http://hiq.linde-gas.com.
Open the catalog to page 2Archived catalogs
BASELINE™ C 106X/12 Pages
BASELINE® V 106P/12 Pages
REDLINE® Gas panels S 2004 Pages
BASELINE™ C 106/1.2 Pages
BASELINE™ C 106/2.2 Pages
BASELINE™ R 104/1.2 Pages
REDLINE® gas panel A 3083 Pages
REDLINE® Points of use W 40.2 Pages
- Valve
- Linde medical gas pressure regulator
- Gas outlet
- Medical pressure regulator
- Gas valve
- Manifold
- Medical gas manifold
- Linde single-stage pressure regulator
- Laboratory pressure regulator
- High-pressure pressure regulator
- Linde two-stage pressure regulator
- CO2 pressure regulator
- Automatic manifold
- N2O pressure reducer
- Supply manifold
- High-pressure valve
- Low-pressure pressure regulator
- Change-over manifold
- Hospital manifold
- Manual manifold