REDLINE® Points of use W 40.
REDLINE® Points of use W 40.
The document describes the REDLINE® Points of Use W 40, a wall-mounted system designed for specialty gases requiring high purity, tightness, and safety. It is available in various designs (A, B, C, F) and materials (brass, stainless steel).
Design Specifications
- Design A: Basic model with no specified pressure or flow range.
- Design B: Offers pressure ranges of 0.1–1 bar (1.5–15 psi), 0.5–6 bar (8–85 psi), and 1–10.5 bar (15–150 psi).
- Design C: Similar to Design B with additional equipment.
- Design F: Fixed pressure and flow meter with a pressure of 3 bar (45 psi).
Technical Data
- Maximum primary pressure: 40 bar (550 psi).
- Pressure gauge scales: Ranges from -1 to 18 bar (-14.5 to 260 psi).
- Maximum flow rates for nitrogen: 2 Nm3/h (700 SCFH), 6 Nm3/h (2,100 SCFH), 11 Nm3/h (3,850 SCFH).
- Materials: Brass (Ni/Cr plated) and Stainless Steel 316L.
- Operating temperature: -20 to +70°C (-4 to +158°F).
Contact Information
Linde AG, Linde Gases Division, Seitnerstrasse 70, D-82049 Pullach, Germany. Phone: +49.89.74 46 1661, Fax: +49.89.74 46-2071, Email: [email protected], Website: hiq.linde-gas.com.
Catalog excerpts
3 Product sheet, Specialty gas W 40, design C. Description The point of use is especially developed for specialty gases with high demands of purity, tightness and safety. The point of use is intended for wall-mounting with external gas supply line. Design F is a version with fixed pressure and flow meter. Product name W 40 A, brass W 40 A, stainless steel W 40 B, brass W 40 B, brass W 40 B, brass W 40 B, stainless steel W 40 B, stainless steel W 40 B, stainless steel W 40 C, brass W 40 C, brass W 40 C, brass W 40 C, stainless steel W 40 C, stainless steel W 40 C, stainless steel W 40 F, brass W 40 F, stainless steel ® HiQ and REDLINE are registered trademarks of The Linde Group.
Open the catalog to page 1
3 REDLINE® Points of use W 40. Wall design. 2 of 2 3 REDLINE® Points of use W 40. Wall design. 2 of 2 Technical data Pressure gauge scale -1-1.5 bar -14.5-21 psi Max flow (nitrogen) 2 Nm3/h 700 SCFH Material Brass, Ni/Cr plated All measurements in millimeters. W40 C in the drawing is extra equipped. Linde AG Linde Gases Division, Seitnerstrasse 70, D-82049 Pullach, Germany Phone +49.89.74 46 1661, Fax +49.89.74 46-2071, e-mail: [email protected], http://hiq.linde-gas.com.
Open the catalog to page 2Archived catalogs
BASELINE™ C 106X/12 Pages
BASELINE® V 106P/12 Pages
REDLINE® Gas panels S 2004 Pages
BASELINE™ C 106/1.2 Pages
BASELINE™ C 106/2.2 Pages
BASELINE™ R 104/1.2 Pages
REDLINE® Points of use B 402 Pages
REDLINE® gas panel A 3083 Pages
- Valve
- Linde medical gas pressure regulator
- Gas outlet
- Medical pressure regulator
- Gas valve
- Manifold
- Medical gas manifold
- Linde single-stage pressure regulator
- Laboratory pressure regulator
- High-pressure pressure regulator
- Linde two-stage pressure regulator
- CO2 pressure regulator
- Automatic manifold
- N2O pressure reducer
- Supply manifold
- High-pressure valve
- Low-pressure pressure regulator
- Change-over manifold
- Hospital manifold
- Manual manifold