Catalog excerpts
3 Product sheet, Specialty gas REDLINE® Gas panels A 208. Semi-automatic gas panel. Single stage, semi-automatic gas supply panel with internal gas purging, designed for high purity gases and mixtures. Gas panel A 208 is a semi-automatic gas panel designed for uninterrupted gas supply. Switch-over between the two connected cylinders or bundles occurs when the pressure of one side (the primary side) falls below a preset pressure level. This is achieved by two integrated regulators (factory-set to slightly different delivery pressure levels) which are connected at their outlet ports. Semi-automatic supply panels should be connected to an alarm so that the cylinders will be switched on time. The panel can also be equipped with contact gauge (/C models) for automatic surveillance. When applicable the panel can be ordered with residual gas line (/R models) connecting the relief valve with the purge outlet. Continuous supply of pure gases Automatic switch over without auxiliary power Positive indication of active cylinder Process-gas purging system High ow capacity Compact design ® HiQ and REDLINE are registered trademarks of The Linde Group.
Open the catalog to page 13 REDLINE® Gas panels A 208. Semi-automatic gas panel. Technical data Inlet primary pressure Outlet pressure 230 bar 3,300 psi 14 +3/–3 bar 200 +45/–45 psi 50 +8/–10 bar 725 +115/–145 psi Operating temperature –20 – +70°C –4 – +158°F Connection 2x1 to 2x4 cylinders NPT 1/4” female Process gas in Process gas out NPT 1/4” female Purge gas outlet Tube tting 6 mm Material Housing Brass, Ni/Cr plated Stainless steel 316L Seals PVDF PCTFE Membrane Hastelloy® * Set pressure operating side ** Set pressure backup Flow, Nm3/h N2 Process gas inlet Linde AG Linde Gases Division, Seitnerstrasse 70,...
Open the catalog to page 23 REDLINE® Gas panels A 208. Product names and codes. = Long exihose and number of cylinders = Coil and number of cylinders = Short exihose and number of cylinders = Residual gas outlet and contact gauge HiQ® code A 208 short exihose and 2 cylinders B B SS SS A 208 short exihose and 4 cylinders B B SS SS HiQ® code A 208 long exihose and 4 cylinders B B SS SS A 208/R residual gas outlet, short exihose and 4 cylinders 4320 4321 4338 4339 A 208 long exihose and 8 cylinders B B SS SS A 208/R residual gas outlet, long exihose and 4 cylinders A 208/R residual gas outlet, long exihose and 8...
Open the catalog to page 3REDLINE® Gas panels A 208. Product names and codes. 4 of 4 HiQ® code Specifications bar HiQ® code Specifications bar psi HiQ® code A 208/C contact gauge, coil and 2 A 208/RC residual gas outlet, contact gauge, short flexihose and 2 cylinders A 208/C contact gauge, coil and 4 A 208/C contact gauge, coil and 8 A 208/C contact gauge, short A 208/C contact gauge, long A 208/C contact gauge, long A 208/RC residual gas outlet, contact A 208/RC residual gas outlet, contact gauge, short flexihose and 4 cylinders A 208/RC residual gas outlet, contact gauge, short flexihose and 8 cylinders A 208/C...
Open the catalog to page 4All Linde HiQ catalogs and technical brochures
-
REDLINE® Points of use W 40.
2 Pages
-
REDLINE® Gas panels S 200
4 Pages
-
REDLINE® gas panel A 308
3 Pages
-
REDLINE® Points of use B 40
2 Pages
-
BASELINE® V 106P/1
2 Pages
-
BASELINE™ R 104/1.
2 Pages
-
BASELINE™ C 106X/1
2 Pages
-
BASELINE™ C 106/2.
2 Pages
-
BASELINE™ C 106/1.
2 Pages