MU 3 DOUBLE
2Pages

Concepteur Fabricant Designer Manufacturer Protective cabinet with three compartments Designed to house a complete computer workstation: LCD monitor, base unit, printers and keyboard Characteristics • The enclosure body consists of a single thermoplastic unit so that the front, sloping top and rear are part of the same structure • • Access to both upper compartments via PMMA doors (transparent thermoplastic) - 6mm thick Access to computer equipment via the a sliding panel on the right hand side of the cabinet running in 10 mm deep slots Leaktight cabinet The body is a composite material, 19 mm thick, making it watertight Compartments protected by compression latches: doors held in place against a seal located within the frame With three sliding shelves: two for printers and one for the keyboard • Connectivity: the cabinet is supplied with: • A strip of five 220V 10/16A electrical sockets with its own illuminated master switch • Two standard cable glands (7 to 13 mm) to allow cables to enter the cabinet Monitor & Base Unit compartment: • Front face protected by PMMA transparent protective panel, 6 mm thick • Access is via door fitted with polyamide hinges Printer compartment • Access is via doors fitted with polyamide hinges • Sliding shelf fitted to triple extending rails in stainless steel, capable of handling loads of up to 60 kg, allowing the printers to be pulled fully free Keyboard compartment • Compartment access via a thermoplastic, 10 mm thick door with three compression latches, seale provided by a sealing gasket in the lip of the door Sliding shelf in white PE running on two PE rails with mechanical stops • Optimised working space • Improved leaktightness • Permanent protection Available in MU3 single version and in stainless steel MU 3 DOUBLE DIMENSIONS (mm): External overall Internal (monitor + Base Unit) Internal (printers) W 880 x D 605 x H 1070 (front) 990 (rear) W 840 x D 565 x H 475 (front) 400 (rear) Internal (keyboard) MU 3 DOUBLE with shelving extended (for printers and keyboard) MU 3 DOUBLE with side panel slid op

Fixed and mobile workstations Concepteur Fabricant 1: Cabinet: 3 or 4 compartments DESCRIPTION OF OPTIONS Slot LABEL SLOT + GUIDE LABEL SLOT option • TAV: Inspection port in unbreakable polycarbonate Available in two sizes: • TAV L 12: W 220 x H 100 mm • TAV L 24: W 220 x H 190 mm • LABEL SLOT + GUIDE: Opening on the front of the cabinet for labels Option KDL: • Opening cable gland system designed to allow cables to be connected without having to remove their end pieces • The gable glands are in two sections which hold the cables in leaktight seals • Usually fitted into one of the side...