ECS20 SERIESLow Cost Electrodeless Conductivity Sensors. Features • Low maintenance • Inline, dip and tank mounting options • Ideal for cooling tower bleed, rinse water & solution concentration applications • Competitively priced The ECS20 series of electrodeless conductivity sensors have been developed and engineered to produce a very low cost sensor without sacrificing performance or quality. This has been achieved by injection moulding the sensor in glass loaded polypropylene. The ECS20 series sensors are extremely tolerant of coating on the sensor, probably the greatest problem with conventional conductivity measurement. The sensors will operate with virtually zero maintenance and provide reliable measurement. The ECS20T incorporates temperature compensation and by utilising the correct version and suitable mounting accessories the sensors can be mounted inline, in an open tank, in a tank wall or a large bore pipe.

www.lth.co.uk ECS20T sensor only Operating temperature: -5 to 60°C (not freezing) Wetted material: Glass filled Polypropylene Temperature compensation: PT1000 Cable: Cable length up to 100 metres maximum (Dependent on instrument type), terminated with tag ends or C16 connector Connection: 0.5" BSP male Protection: IP67 ECS22T dip assembly Material: PVC Operating temperature: -5 to 60°C (not freezing) Dip length: 600, 1200 or 2000mm Mounting: Bracket or flange options Protection: IP68 ECS24T in line assembly Material: PVC with Viton seal. Operating temperature: -5 to 60°C (not freezing) Size:...

LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: [email protected] web: www.lth.co.uk Electronics www.lth.co.uk These products comply with current European Directives LTH Electronics Ltd reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements. All care has been taken to ensure the accuracy of information contained in this data sheet. However we cannot accept responsibility for any errors or damages resulting from errors...