LUDWIG SCHNEIDER

TABLE OF CONTENTS UNIVERSAL PUSH-IN THERMOMETERS 4 DIGITAL MONITORING THERMOMETERS 8 DIGITAL HANDHELD MEASURING DEVICES 13 TEMPERATURE PROBES FOR DIGITAL HANDHELD MEASURING DEVICES 15 PHYSICS - DIGITAL MEASURING DEVICES 17 TEMPERATURE PROBES FOR PHYSICS -DIGITAL MEASURING DEVICES 20 ACCESSORIES FOR PHYSICS - DIGITAL MEASURING DEVICES 23 CALIBRATED TEMPERATURE MEASURING SYSTEMS 24

THE FUTURE IS HIGHLY PRECISE THE TEMPERATURE PROFESSIONALS Ludwig Schneider GmbH & Co. KG ranks among the world’s foremost manufacturers of high-precision temperature and density measuring instruments. Our product variety ranges from push-in thermometers for universal use through to high-precision measuring systems. These, in combination with a traceable DAkkS calibration certificate – from our own calibration laboratory Ludwig Schneider Messtechnik GmbH – fulfill highest quality standards. DIGITAL THERMOMETERS FROM -200 °C TO +1 370 °C The high-precision digital instruments are designed for...

DIGITAL PUSH-IN THERMOMETER WITH PLASTIC SLEEVE INCLUSIVE CLIP TYPE 12050

DIGITAL PUSH-IN THERMOMETER WITH PLASTIC SLEEVE INCLUSIVE CLIP TYPE 13020

DIGITAL POCKET THERMOMETER WITH PLASTIC SLEEVE AND CLIP TYPE 12060

WATERPROOF POCKET THERMOMETER WITH PLASTIC SLEEVE TYPE 12090 General Specifications

DIGITAL MIN/MAX-ALARM-THERMOMETER WITH DATA LOGGING FUNCTION AND USB INTERFACE, TYPE 15010 General Specifications Freezers -20 °C ethylene glycol mixture 65809/-20C Refrigerators +4 °C ethylene glycol mixture 65809/+4C Incubators +37 °C ethylene glycol mixture 65809/+37C Works calibration certificate -10 °C und +40 °C ethylene glycol mixture 65809/03/2P DAkkS calibration certificate -10 °C und +40 °C ethylene glycol mixture 65809/04/2P A calibration can only be made for the external temperature

DIGITAL MIN/MAX-ALARM-THERMOMETER TYPE 13000

General Specifications OPTIONALLY AVAILABLE WITH BOTTLES 5 ml Type 13041 with 2 temperature probes, attached in 5 ml plastic bottles, filled with ethylene glycol/water 65811 (for measuring delay/alarm lag at opened door) cable: 1 m

WIRELESS MIN/MAX ALARM THERMOMETER TYPE 13090 General Specifications

DIGITAL HANDHELD MEASURING DEVICE WITH TEMPERATURE PROBE TYPE 12200

DIGITAL HANDHELD MEASURING DEVICE WITH TWO INPUT CHANNELS TYPE 13100 For thermocouples Type K (NiCr-Ni) General Specifications

THERMOCOUPLES FOR DIGITAL MEASURING DEVICES TYPE 13100; TYPE 15210 TYPE K THERMOCOUPLE TO IMMERSE (NICR-NI) Assembly: TE-MI-303, with miniature plug yellow (THERM 2) General Specifications Mineral-insulated thermocouple 1 x NiCr-Ni type K acc. to DIN EN 60584 class 1, sheath made of Inconel, compensating line fix connected through transition casing made of stainless steel, silicon/teflon insulated, cable length 2 m, cable outlet secured by means of heat-shrink tubing. Nominal length Range of application Order-No. 3 mm 3 mm 3 mm 3 mm 1 mm 1 mm 1 mm 0.5 mm 0.5 mm 0.5 mm TYPE K THERMOCOUPLE TO INSERT...

PRECISION HANDHELD MEASURING DEVICE WITH Pt100, IEC 751 TYPE 13750

For highest precision we provide our PHYSICS measuring devices for precise measurements in meteorology, chemical, biotechnology, food industries, water analytics, science and research as well as for quality assurance or inspection equipment monitoring in the industrial sector. By means of real-time recording or logger function it is furthermore possible to make rapid and precise temperature recordings directly on site. GENERAL TECHNICAL DATA + 2 output channels + 2 lines, statically 7/16 segments + Display illumination: 2 LEDs, white + 7 silicone keys + ABS casing (max. 70 °C), light grey + Degree...

PHYSICS 300 Complex digital measuring device with data logger function* for precise measurements with a wide range of measuring units and sensor technologies, e.g. temperature, resistance thermometer Pt100, thermocouples, NTC, air humidity, pressure, electric values etc. Subject to type of probe 2, 3 or 4 input channels or measuring points can be covered simultaneously. FURTHER FEATURES + Intelligent probe display with probe specific functions (cold-junction compensation etc.) + Measurement menu freely configurable, measured values can be displayed numerically or graphically in bar chart form...

PHYSICS 1000 Ludwig Schneider's high-precise digital measuring device PHYSICS 1000 offers highest resolution, accuracy and linearity for mains independent measurements. With its ultra high resolution of 0.001 °C this digital measuring device provides dependable and reproducible results of mobile temperature measurements in quality assurance, process monitoring and production control in the chemical, pharmaceutical and food industries as well as for research and development. FURTHER FEATURES + Reference measuring instrument for temperature + Highest accuracy by multi-point adjustment of the Pt100...

THERMOCOUPLES FOR PHYSICS - DIGITAL MEASURING DEVICES SUITABLE TO PHYSICS MEASUREMENT DEVICES Pt100 RESISTANCE THERMOMETER TO IMMERSE General Specifications Immersion resistance thermometer Pt100, acc. to DIN EN 60751 class A or AA, 4-wire connection, with sheathed cable made of stainless steel, compensating line fix connected through transition casing made of stainless steel, teflon/silicone insulated, cable length: 2 m, cable outlet secured by means of heat-shrink tubing. PLUG PHYSICS RESOLUTION 0.01 °C (CLASS A) Sheat Ø Nominal length PLUG PHYSICS RESOLUTION 0.001 °C (CLASS AA) Sheat Ø Nominal...

THERMOCOUPLES FOR PHYSICS - DIGITAL MEASURING DEVICES SUITABLE TO PHYSICS MEASUREMENT DEVICES Pt100 RESISTANCE THERMOMETER OF GLASS (N16B) General Specifications Labor resistance thermometer of glass Pt100, acc. to DIN EN 60751 class A, 4-wire connection, with glass shaft ø 6 mm, narrowed at sensor to ø 3 mm, compensating line fix connected through transition casing made of stainless steel, teflon/silicone insulated, cable length: 2 m, cable outlet secured by means of heat-shrink tubing. PLUG PHYSICS RESOLUTION 0.01 °C (CLASS A) Glass shaft Ø Nominal length PLUG PHYSICS RESOLUTION 0.001 °C (CLASS...