4-WAY, MANUAL, MECHANICAL AND REMOTE AIR PILOT, INDIVIDUAL AND STACKING BODIES#10-32 & 1IB"—Cv UP TO 0.20 PRESSURE RANGE—VACUUM TO 1 SO PSI INDIVIDUAL BODY SHOWN ACTUAL SIZE (PATENTS & PATENTS PENDING) SERIES FEATURES • Bonded seal spool for extended life and ease of maintenance. • One piece precision machined body for long life. • High flow in a small package. • Optional integral individual exhaust flow controls with a single common exhaust port. • Use on lubricated or non-lubricated service. • Large selection of operators. • Universal operator mounting holes for easy conversion between operators. • Remote air operators have ability to use a pilot signal pressure different from main valve pressure. Pilot signal can be 35-150 PSIG, regardless of main valve pressure. Manual operator/indicator is standard. FOR VALVE OPERATOR OPTIONS SEE NEXT PAGE The MAC 1600 Series is ideal for applications requiring a small 4-way remote air, manual or mechanically operated valve. • 2-position single or double operators. • Individual or stacking bodies. • Single pressure. On all models, activating the "A" operator supplies pressure to cylinder port "A" and activating the "B" operator supplies pressure to cylinder port "B". For the following special applications, additional piping considerations are required. • VACUUM APPLICATIONS: Connect the vacuum source to the Exhaust port with the Inlet open to atmosphere. Use models without flow controls only. • SELECTOR APPLICATIONS: When using as a selector valve, connect the higher pressure to the Inlet port and the lower pressure to the Exhaust port. Use models without flow controls only. OPERATING DATA Pressures shown are minimum and maximum safe working pressures. PRESSURE RANGE MAIN VALVE: VAC to 150 PSIG REMOTE PILOT OPERATOR SIGNAL: Single Operator, Spring Return Double Operator FLOW CONSTANT: Cy. (Average all ports) FLUIDS: Air or inert gases LUBRICATION: Not required, but if lubrication is used, a medium range aniline oil is recommended. TEMPERATURE 0° to 120°F. (-18° to50°C.) RANGE: Consult factory outside this range

To order a complete valve requires the selection of an Operator B, followed by the selected body, followed by the selected Operator A. The operator numbers for both "A" and "B" are listed below in the left hand table. The 3 digit body numbers are selected from the right hand table, by selecting one digit from body type and two digits from port size. OPERATOR B BODY OPERATOR A * To order Lever Operators with boot, substitute 2 for 0 in first digit, i.e., -221. Y BODY TYPE | YY PORT SIZE MANIFOLD ACCESSORIES MANIFOLD END PLATE KIT—For each gang, one kit is required. ISOLATORS—Sections of a gang...

SINGLE OPERATOR SPRING RETURN DOUBLE OPERATOR SINGLE OPERATOR SPRING RETURN WITH INTEGRAL EXHAUST FLOW CONTROLS DOUBLE OPERATOR W/INTEGRAL EXHAUST FLOW CONTROLS 1600 SERIES—ANSI TYPE SYMBOLS VALVE OPERATORS --3- Straight Cam Roller Parallel to Ports Straight Cam Roller Perpendicular to Ports 021 Lever, Locking, Push Perpendicular to Body 022 Lever, Non-Locking, Push Perpendicular to Body 023 Lever, Locking, Pull Perpendicular to Body 024 Lever, Non-Locking, Pull Perpendicular to Body 025 Lever, Locking, Push Parallel to Body 026 Lever, Non-Locking, Push Parallel to Body 027 Lever, Locking, Pull...