*mymedicalexpo

26 Series

Product catalog summary

Specifications
The 26 Series Valve is designed for use with compressed air or inert gases. It does not require lubrication, but if used, a medium aniline point lubricant between 180º and 210ºF is recommended. The safe operating temperature range is from 0ºF to 120ºF (-18ºC to 50ºC). The pressure range for the main valve is from vacuum to 100 PSI with an external pilot and 40 to 100 PSI with an internal pilot. The external pilot operates between 40 to 100 PSI. The flow coefficient (Cv) is 0.25, with higher flows available upon consultation with the factory. The valve operates on DC voltage of 12 or 24 volts, with wattage ranging from 1.0w to 4.0w, and higher wattages available upon request. The coil uses #24 AWG x 18 lead wires.

Ordering Information
The 26 Series Valve can be ordered using a specific code that includes function, body type, port size and thread type, configuration, pilot function, wire length, and manual operator options. Various configurations and modifications are available, including different voltage and solenoid cover options.

Technical Data
The valve is compatible with compressed air or inert gas and does not require lubrication. The safe operating temperature range is slightly extended to 0º to 149ºF (-18º to 65ºC). The pressure range remains the same as specified earlier. The flow coefficient is 0.25, with options for higher flows. The valve supports DC 12/24 volts, with additional wattages and energy reduction circuits available. Porting options include various sizes and thread types, such as 1/8” NPTF and M5 cylindrical ports.

Design and Features
The 26 Series Valve features high-speed, long-life, and consistent response, known as the MAC Advantage. It includes POP Technology and Bullet Valve PoweredR for enhanced performance. The valve is available with additional wattages and energy reduction circuits, and customers are advised to consult the factory for specific ordering information.

Catalog excerpts

Specifications 26 Series Valve Fluids: Compressed air or inert gases Lubrication: Not required. If used, select a medium aniline point lubricant (between 180º and 210ºF) Safe Operating Temperature Range: 0ºF to 120ºF (-18ºC to 50ºC) Pressure Range: Main Valve: External pilot: Flow: Vacuum to 100 PSI (External pilot) 40 to 100 PSI (Internal pilot) 40 to 100 PSI Cv = .25 (Higher flows available - consult factory) Voltage: DC 12/24 Volt 1.0w to 4.0w (Higher wattages available - consult factory) Coil:

Open the catalog to page 1

Body Type Inline 5 Port Port Size and Thread Type Configuration A 1/8” NPTF - All Ports 0 Inline B #10-32 Cyl. Ports (Ports 1,3 and 5 1/8” NPTF) C M5 Cyl. Ports (Ports 1,3 and 5 1/8” NPTF) D M7 Cyl. Ports (Ports 1,3 and 5 1/8” NPTF) Function Sgl. Oper. Sgl. Press. 1 Pilot Function Int/Ext 1 Int. Piot (Sgl. Press) Muffled Exh. 2 Int. Pilot (Sgl. Press) Piped Pilot Exh. 7 Ext. Pilot (Sgl. Press) Muffled Exh. 8 Ext. Pilot (Sgl. Press) Piped Pilot Exh. E 1/8” BSPPL - All Ports Ext. Pilot: F #10-32 Cyl. Ports (Ports 1,3 and 5 1/8” BSPPL) Inline: Port is on 14 End G M5 Cyl. Ports (Ports 1,3 and 5 1/8”...

Open the catalog to page 2

How to Order Pilot Valve Options For 26 Series XX - B XX X - X XX Bullet Pilot Valve BC Pilot Valve St’d Pilot Valve may be ordered separately BCA-BXXX-XXX Manual Operator No manual operator Recessed Non-Locking Operator Solenoid Cover / Electrical Connector Flying Lead Covers No Ground Blocking & Supression Diode & LED (No Ground) Blocking & Supression Diode (No Ground) LED (No Ground) MOV (No Ground) MOV & LED (No Ground) “JST” Plug-In Covers No Ground Blocking & Supression Diode & LED (No Ground) Blocking & Supression Diode (No Ground) LED (no Ground) MOV (No Ground) MOV & LED (No Ground)...

Open the catalog to page 3

How to Order Pilot Valve Options For 26 Series Modification 8484 XX - B XX X - X XX Bullet Pilot Valve BD Diaphragm Manual Operator Recessed Non-Locking Operator Solenoid Cover / Electrical Connector Flying Lead Covers BA No Ground “JST” Plug-In Covers TA No Ground PICO Covers PN T

Open the catalog to page 4

POP Technology, Bullet Valve Powered R Technical Data Sheet 24.50 3.20 THRU TYP. (2) CYLINDER PORT SIZE OPTIONAL EXT. PILOT PORT #10-32 OR M5 X = Cylinder Port Option (see below) High Speed, Long Life, Consistent Response...The MAC Advantage

Open the catalog to page 5