*mymedicalexpo

MACS 300

Product catalog summary

Specifications:
The MACS 300 features a volume filling hopper of 350 liters and a process capacity per cycle of 300 liters or 30–90 kg, depending on the density (0.1–0.3 kg/l). The dimensions are 2,850 mm in height, 2,800 mm in width, and 1,850 mm in depth. It operates on a power consumption of 25 kW on average, with a peak of 35 kW, using a 3-phase, 400 V, 50 Hz–60 Hz power supply.

Reliability and Financial Benefits:
The system ensures consistent operation and security during power outages, independent of external services. It offers rapid installation and setup, reduces hazardous waste handling fees, and maintains low lifetime operating costs.

Compliance and Environmental Impact:
The MACS 300 meets the standards of the Robert Koch Institute. It provides an economic solution by neutralizing germs, viruses, and bacteria on-site, reducing hazardous waste transport costs and CO2 emissions. It supports a circular economy and sustainable resource utilization.

Requirements:
The system emphasizes sustainability through chemical-free operation, energy efficiency, volume reduction, and emission-free performance. It is designed for ergonomic and safe use, with standard utility connections and remote support capabilities. It achieves up to 97% waste volume reduction and offers the best sterilization to energy consumption ratio in its class.

Safety and Emergency Features:
The MACS 300 includes an automatic leak test, fast stop and emergency programs, guaranteed sterilization with hot steam, and a 0.2 μ microbiological filtering system. It also features programmable daily cleaning cycles and ensures that liquids are only released after proper sterilization.

Processable Types of Waste:
The system can process sharps, metallic packing (excluding pressure containers), blood bags, and non-risk healthcare waste. It is not suitable for VOCs, chemotherapeutic, or radiological wastes.

Key Data:
The autoclave volume is 245 liters, with a noise level of less than 65 dB. It includes a steam generator and an oil-free air compressor. The process involves a pre-vacuum and plateau phase at 136°C and up to 4.5 bar pressure. The theoretical maximum process capacity is 5,400 liters or 1,620 kg per 24 hours.

Life Cycle Assessment:
The system offers a volume reduction potential of 178,704 liters per year and a CO2 reduction potential of 7,506 tons over 600 km, with zero CO2 emissions annually.

Connections and Consumption:
It requires a water inlet of 3/4” and a water outlet of 2”, with potable water at a minimum pressure of 4.5 bar. The system can connect to a local network via LAN/WLAN and consumes up to 180 liters of water per cycle.

Documentation:
Integrated on-board printer provides documentation of pressure, temperature, time, and cycle number every minute during the plateau phase. Data can be transferred via USB or SD card.

Location Requirements:
The system requires approximately 29 m² of space, with specific minimum distances from walls and ventilation requirements of six air changes per hour.

Catalog excerpts

MACS 300 Conquering the challenges of hazardous waste. MEETS MACS autoclaves provide an outstanding economic solution by efficiently neutralizing germs, viruses, and bacteria on-site, significantly reducing hazardous waste transport costs and related CO2 emissions. The system also effectively prevents cross-contamination and enables the efficient treatment of liquids and food. These benefits support a circular economy and promote sustainable resource utilization. ROBERT KOCH INSTITUTE REQUIREMENTS Volume filling hopper: 350 liters Process capacity per cycle*: 300 liters / 30–90 kg (density 0.1–0.3 kg/l) Height/ width/ depth: 2.850 / 2.800 / 1.850 mm Power consumption: Unit-average 25 kW 3 phase, 400 V, 50 Hz–60 Hz Financial benefits Achieves up to 97 % waste volume reduction. The best sterilisation to energy consumption ratio in its class. Ergonomic and safe, standard utility connections, remote support capabilities. Through its chemicalfree operation, energy efficiency, volume reduction, emission-free performance. Consistent operation, security during power outages, independent from external services. Rapid installation and setup, reduction of hazardous waste handling fees, low lifetime operating costs.

Open the catalog to page 1

Volume Filling Hopper 350 l SAFETY- AND EMERGENCY FEATURES Noise level <65 dB Condensate/air Oil-free air compressor, all exhaust air flows through a 0.2 micron HEPA filter Shredder Electric motors, each with reverse rotation, blades made of Hardox© steel Frame Steel Casing/Bodywork Steel optional: customizable machine's colour Process capacity per cycle 300 l / 30-90 kg (density 0,1 -0,3 kg/l) Process Pre-vacuum plus plateau phase 10 alternatively 20 mins., temp. 136°C, pressure up to 4,5 bar Process capacity/24 h (18 cycles, as 5.400 l / 1.620 kg theoretical maximum) Shredding time 6-10 minutes...

Open the catalog to page 2

MACS 300

MACS 300

Catalog excerpts

All MACS Sterilisationsanlagen GmbH catalogs and technical brochures