*mymedicalexpo

MACS 700

Product catalog summary

Specifications:
The MACS 700 features a volume filling hopper of 350 liters and a process capacity per cycle of 700 liters or 70–210 kg, depending on the density (0.1–0.3 kg/l). The dimensions are 2,850 mm in height, 2,800 mm in width, and 1,850 mm in depth. It operates on a power consumption of 30 kW on average, with a peak of 45 kW, using a 3-phase, 400 V, 50 Hz–60 Hz power supply. The standard process time is 60 minutes.

Reliability and Financial Benefits:
The system ensures consistent operation and security during power outages, independent of external services. Financially, it offers rapid installation and setup, reduces hazardous waste handling fees, and maintains low lifetime operating costs.

Compliance and Environmental Impact:
The MACS 700 meets the standards of the Robert Koch Institute, providing an economic solution for neutralizing germs, viruses, and bacteria on-site. This reduces hazardous waste transport costs and CO2 emissions, supporting a circular economy and sustainable resource utilization.

Requirements:
The system emphasizes sustainability through chemical-free operation, energy efficiency, and emission-free performance. It is designed for ergonomic and safe use, with standard utility connections and remote support capabilities. It achieves up to 97% waste volume reduction and offers the best sterilization to energy consumption ratio in its class.

Safety and Emergency Features:
The MACS 700 includes an automatic leak test, fast stop and emergency programs, guaranteed sterilization with hot steam, and a 0.2 μ microbiological filtering system. It also features programmable daily cleaning cycles and ensures that liquids are only released after proper sterilization.

Processable Types of Waste:
The system can process sharps, metallic packing (excluding pressure containers), blood bags, and non-risk healthcare waste. It is not suitable for volatile organic compounds, chemotherapeutic, or radiological wastes.

Key Data:
The autoclave volume is 245 liters, with a noise level below 65 dB. It includes a steam generator and an oil-free air compressor. The shredder uses electric motors with Hardox© steel blades. The process involves a pre-vacuum and plateau phase at 136°C and up to 4.5 bar pressure. The system can handle up to 12,600 liters or 3,780 kg per 24 hours, with a shredding time of 6–10 minutes.

Life Cycle Assessment:
The system offers a volume reduction potential of 367,920 liters per year and a CO2 reduction potential of 15,453 tons over 600 km, with zero CO2 emissions annually.

Connections and Consumption:
It requires a water inlet of 3/4” and a water outlet of 2”, with potable water at a minimum pressure of 4.5 bar. The system supports LAN/WLAN connections and consumes up to 180 liters of water per cycle.

Documentation:
Integrated on-board printer provides documentation of pressure, temperature, time, and cycle number. Data can be transferred via USB or SD card, with network connectivity options.

Location Requirements:
The system requires approximately 29 m² of space, with specific clearance and ventilation needs.

Catalog excerpts

MACS 700 Conquering the challenges of hazardous waste. MACS autoclaves provide an outstanding economic solution by efficiently neutralizing germs, viruses, and bacteria on-site, significantly reducing hazardous waste transport costs and related CO2 emissions. The system also effectively prevents cross-contamination and enables the efficient treatment of liquids and food. These benefits support a circular economy and promote sustainable resource utilization. ROBERT KOCH INSTITUTE REQUIREMENTS Volume filling hopper: 350 liters Process capacity per cycle*: 700 liters / 70–210 kg (density 0.1–0.3 kg/l) Height/ width/ depth: 2.850 / 2.800 / 1.850 mm Power consumption: Unit-average 30 kW 3 phase, 400 V, 50 Hz–60 Hz Financial benefits Achieves up to 97 % waste volume reduction. The best sterilisation to energy consumption ratio in its class. Ergonomic and safe, standard utility connections, remote support capabilities. Through its chemicalfree operation, energy efficiency, volume reduction, emission-free performance. Consistent operation, security during power outages, independent from external services. Rapid installation and setup, reduction of hazardous waste handling fees, low lifetime operating costs.

Open the catalog to page 1

Volume Filling Hopper 350 l SAFETY- AND EMERGENCY FEATURES Noise level <65 dB Condensate/air Oil-free air compressor, all exhaust air flows through a 0.2 micron HEPA filter Shredder Electric motors, each with reverse rotation, blades made of Hardox© steel Frame Steel Casing/Bodywork Steel optional: customizable machine's colour Process capacity per cycle 700 l / 70-210 kg (density 0,1 -0,3 kg/l) Process Pre-vacuum plus plateau phase 10 alternatively 20 mins., temp. 136°C, pressure up to 4,5 bar Process capacity/24 h (18 cycles, as 12.600 l / 3.780 kg theoretical maximum) Shredding time 6-10 minutes...

Open the catalog to page 2

MACS 700

MACS 700

Catalog excerpts

All MACS Sterilisationsanlagen GmbH catalogs and technical brochures