VENTURA IMPRESS 2 LIGHT BODY REGULAR SET

Product catalog summary

Product Specification: VENTURA IMPRESS 2 LIGHT BODY REGULAR SET

Description: This product is an addition-polymerizable silicone (polyvinylsiloxane) classified as a Class I Medical Device according to EN ISO 4823:2015 standards.

Advantages:

Excellent hydrophilicity and detail reproduction.
Good mechanical properties with low linear shrinkage.
No toxic substances released during or after curing.
High resistance to inorganic chemicals and UV rays.
Good release properties with organic resin and hydrated gypsum.

Characteristics Before Curing:

Part A and Part B are viscous fluids with densities of 1.37 g/cm³.
Part A is white, and Part B is green.

Curing:

Setting time: 2 minutes 15 seconds.
Total setting time: 3 minutes 30 seconds.

Characteristics After Cross-Linking:

Shore A hardness after 24 hours: 53.
Dimensional stability: less than 0.2%.
Tensile strength: 3-5%.
Elastic recovery: 99.8%.
Excellent compatibility with gypsum.

Storage:

Recommended temperature: ≤ 5 ºC (41 ºF) to ≥ 27 ºC (80.6 ºF).
Shelf life: 3 years.

Packaging:

2017: 2 x 50 ml light body regular set.
2019: 4 x 50 ml light body regular set.

Catalog excerpts

VENTURA IMPRESS 2 LIGHT BODY REGULAR SET-1

LINEA CLÍNICA / CLINIC LINE VENTURA IMPRESS 2 LIGHT BODY REGULAR SET 2 DESCRIPCIÓN / DESCRIPTION Tipo de material / Type of material Siliconas polimerizables por adición (polivinilsiloxano) Addition-polymerizable silicones (polyvinylsiloxane) Clasificación / Classification Producto Sanitario de Clase I / Class I Medical Device Norma / Standard Excelente hidrofilia / Excellent hydrophillicity Reproducción de detalles excelente / Excellent details reproduction Buenas propiedades mecánicas / Good mechanical properties Baja contracción lineal / Low linear schrinkage No libera sustancias tóxicas durante y después del curado / No release of toxic substances during and after curing Alta resistencia a sustancias químicas inorgánicas y rayos UV / High resistance to inorganic chemicals and UV rays Buenas propiedades de liberación con resinas orgánicas y yeso hidrato / Good release properties with organic resi n and hydrated gypsum. 4 CARACTERÍSTICAS ANTES DE LA CATÁLISIS / CHARACTERISTICS OF THE NON CURED PRODUCT Parte A / Part A Líquido viscoso / Viscous fluid Líquido viscoso / Viscous fluid Blanco / White Aspecto / Appearance Verde / Green Densidad / Density (g/cm ) 5 FRAGUADO / CURING Tiempo de trabajo / Setting time Tiempo de fraguado total / Total setting time 6 CARACTERÍSTICAS DESPUÉS DE LA RETICULACIÓN / CHARACTERISTIC OF THE CROSS-LINKED PRODUCT Dureza Shore A a las 24 horas / Shore A hardness after 24 hours Estabilidad dimensional / Dimensional stability (%) Resistencia a la tensión / Tensile strength (%) Recuperación elástica / Elastic recovery (%) Compatibilidad con yeso / Compatibilty with gypsum Excelente / Excellent 7 ALMACENAMIENTO / STORAGE Temperatura de almacenamiento recomendada / Recommended storage temperature Vida media / Shelf life 2017: light body regular set – 2 x 50 ml 2019: li

Open the catalog to page 1

All MADESPA S.A. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list