Catalog excerpts
4) O 9 dental laboratories since 1934
Open the catalog to page 1Up to 10 complete cycles, including date and time data. Parameters can be modified anytime when cycle is running. Up to 3 temperature rates can be preset. • Max temp. 1100°C, • Delayed start with timer, up to 100 hrs. • Automatic start-up and restart after current black-out • Display shows time remaining to cycle end • Capacity up to 5 medium sized casting rings • Dimensions of internal chamber cm: 12x19x10 • Total dimensions cm: 28x43x56 • Weight Kg 31 Low budget burn-out furnace, ideal for fast investments and as backup unit. Equipped with pre-start timer with capacity up to 100 hrs....
Open the catalog to page 2CASTING MACHINES Top sale Induction casting unit ideal for precious and non-precious alloys (except Titanium), suitable for up to 40 continuous castings, thanks to new EBST system – Electronic Board Selected Tolerance. Fast castings: 30 gr. of Cr-Co in less than 60 sec.! Possibility to set power of induction avoiding any alloy burning. Low consumption – 2,4 Kw only. • Max temp. 2000°C • Self-diagnosis system • Power of casting is continuously controlled by means of microprocessor • Motorized movement of the heating coil • Inner cooling device • Electronic temperature reader Same as...
Open the catalog to page 3www.manfredi-saed.com Ephestos “Induction vacuum pressure” Compact and extremely reliable vacuum pressure casting unit, suitable to cast any type of precious and non-precious alloy, from 800 to 2000°C. Continuous temperature control at any stage of casting process. Suitable to be used with any casting ring up to Ø 80x90mm: stainless steel, free expansion, conical, cylindrical or squared versions. Adjustable vacuum parameters, suitable to be used with argon gas. Featuring manual or completely automatic casting cycles. Adjustable casting and melting speeds. Adjustable casting time from 10 up...
Open the catalog to page 4SANDBLASTERS & CERAMICS Quartetto Microsandblaster equipped with 4 aluminum sylos, allowing the use of 4 different types of abrasives from 50 up to 250 µ. Wide working chamber granting excellent lighting and visibility. Fast switch allowing to pass from one abrasive to the following one with “one touch”. Magnetic locking of the main window to reduce dust outflowing. All pencils are very ergonomic and supplied with nozzles of 0.8, 1.2, 1.5 and 2.0mm. Unit equipped with pneumatic system stopping immediately abrasive flowing. Press/porcelain furnace providing conventional firing, multi-stage...
Open the catalog to page 5Digital flask polymerizing units. Special cover avoiding vapors scattering or condensation dripping, thus insuring polymerization cycles to be completed in steam-saturated atmosphere. Automatic pre-polymerization and polymerization cycles protecting flasks from excessive cooling. Quick liquid discharge valve as per CE Directives in force. Automatic switch off system protecting the unit against any overheating. Model trimmers with water inlet device, 1400 rpm, equipped with security switch avoiding any accidental start of the motor after electric black-outs. Adjustable working table....
Open the catalog to page 6Portable brush micromotor featuring clockwise and anticlockwise rotations. Working speed from 3.000 up to 35.000 rpm. Hand/foot switch. Ideal for final touch in dental practice and nylon materials. Top brushes micromotor featuring clockwise and anticlockwise rotations. Speed rising from 1.000 up to 45.000 rpm. 100 watt Power only. FM45 can be equipped whit foot control or with progressive control system to be activated directly from the working bench. Supplied with electronic control system granting good performances anytime even at low regimes. Featuring ceramic front bearing with...
Open the catalog to page 7Wax carving device for hand modelling, ideal when supplied with surveyors. The digital display allows continuous temperature control from 50° up to 200°C. Easy replacement of pencils thanks to the ergonomic handpiece. Mody Touch Mody Touch is the electric wax carving unit allowing “two post” operations. Each unit can set different temperature parameters. “Easy touch” pencil allowing immediate temperature switch (eg. from 105°C – wax temperature – to 50°C for modeling procedures). Supplied with complete set of 6 pencils and special box located on the back of the unit. Eco wax carving unit,...
Open the catalog to page 8All Manfredi catalogs and technical brochures
-
CATALOGUE
32 Pages
-
CONSUMABLE
46 Pages
-
NEW SMALLCAST
2 Pages
-
NEW HYDRAULIC PRESS OL463
1 Pages
-
CLIMAKER
1 Pages
-
FRESATECH
1 Pages
-
KALOSTERY AUTOCLAVES
20 Pages
-
NEW GALILEO LASER
2 Pages
-
SMALLCAST
2 Pages
-
PHOTOTRAY
1 Pages
-
New Polishing Lathe
1 Pages
-
OXYKER MICROSANDBLASTERS
1 Pages
-
KALOSTERY CLASS B AUTOCLAVES
20 Pages
-
SAED LINE 2013
7 Pages
-
OL 463
1 Pages
-
Fresa
1 Pages
-
KERAPRESS
2 Pages
-
GALILEO
2 Pages