Catalogs >
Mar Cor >
1" Carbon Filter Systems 4.5 to 20 USPGM

1" Carbon Filter Systems 4.5 to 20 USPGM
1 / 2Pages

Catalog excerpts

1" Carbon Filter Systems 4.5 to 20 USPGM - 1

Competent, Consistent, & Compliant Pretreatment - Carbon Filters TAFC Series, 1” Activated Carbon Filters The Biolab TAFC 1” Series Activated Carbon Filters are designed to eliminate color, odor, and/or toxicity primarily chlorine and chloramines from incoming water. Our complete system series features the Performa™ valve with standard controller for simple operation and efficient backwashing. Operating Parameters • Pressure: 20-100 psi (138 - 690 KPA) • Temperature: 35-100o F (2-38o C) • Electrical: 115/60Hz, single phase • Inlet/Outlet: 1.0 inch • Drain: 0.75 inch Standard Features • Fully automatic backwash • Single unit flow rates up to 20 USgpm • Parallel flow rates up to 40 USgpm • High quality activated carbon • Non-corroding fiberglass tank • Valve constructed of plastic materials • Standard reliable electronic timer Materials of Construction • Media Tank: FRP - HDPE lined • Control Valve: Glass filled Noryl® • Media: Activated, high quality granular carbon Typical Applications • • • • • • • Reverse osmosis system pretreatment Boiler feedwater Reagent grade lab water systems USP purified water systems Hemodialysis & Life Sciences water systems Commercial & Industrial water systems Food and Beverage Industry Options Available • Single, duplex or parallel configuration • Free standing or skid-mounted systems • Factory, fully pre-plumbed & pre-wired system • Custom installations and valve nests to meet facility

Open the catalog to page 1

1" Carbon Filter Systems 4.5 to 20 USPGM - 2

Product Specifications TAFC Series 1” Carbon Filters @ 25oC Flow Chlorine (USgpm) 5 Min. Empty Bed Contact (USgpm) Backwash Flow (USgpm) Model Number Note: All weights and dimensions are approximate. Installation Considerations • For proper serviceability, it is recommended that there be 18” of space around the entire system. A minimum of 12” is required. The tanks should be installed on a firm, level surface. • The inlet piping should be sized large enough to provide the required water flow for both service flow and backwashing of the tanks with minimum amount of pressure loss. • A drain...

Open the catalog to page 2

1" Carbon Filter Systems 4.5 to 20 USPGM 1 / 2Pages

Catalog excerpts

All Mar Cor catalogs and technical brochures

1" Carbon Filter Systems 4.5 to 20 USPGM
1 / 2Pages