Competent, Consistent, & Compliant Minncare HD is the first chemical disinfectant to hold a FDA 510(k) cleared claim for the disinfection of water purification systems for hemodialysis. Minncare HD is a peracetic acid solution developed specifically for use on hemodialysis reverse osmosis (RO) membranes and their associated distribution systems. Peracetic acid formulations were developed by Minntech Corporation (Medivators Inc.) in 1976 and are currently being used in a wide variety of applications. Mar Cor Purification distributes Minncare HD Disinfectant throughout the renal community. Protect Both You and Your System Minncare HD Disinfectant ensures that your dialysis water purification equipment disinfection procedures are fully validated. The disinfectant was specifically developed and tested for conditions present within water purification systems licensed for use in hemodialysis applications. Superior Biocidal Activity Protect reverse osmosis membranes and their associated distribution systems against short- and long-term bacterial Minncare HD eliminates the risk of using unregulated industrial problems. Minncare HD Disinfectant is a powerful oxidant chemicals, such as chlorine bleach, in patient treatment areas. that stops organism growth by oxidizing microbial cell The disinfection protocol is validated, the chemistry has been proteins and enzyme systems and has been shown to be proven efficacious, and accurate test strips are available to insure effective against biofilms. dosage, as well as to verify complete disinfectant rinse out of the Minncare HD Disinfectant provides a 6 log reduction disinfectant. The use of Minncare HD in a dialysis clinic will help maintain the water system in optimum condition and make it easier for the water system operator to complete an effective disinfection. of bacteria population at a 100X dilution (1%) within a 36-minute soak time. Elimination of bacterial contamination will help improve product quality and contribute to increased Biodegradable and Ease of Disposal Minncare HD Disinfectant is biodegradable and will decompose into Compatible w/ Thin Film Composite Membranes oxygen, water and acetic acid. It poses no threat to municipal waste treatment plants.* Minncare HD Residual test strips are available that accurately verify rinse-out levels of Minncare HD Disinfectant as low as one part per million. Minncare HD Disinfectant gently and completely cleans membranes. Original Minncare Cold Sterilant has been successfully used at hundreds of locations on thin film composite membranes and cellulose acetate membranes. Many of the applications have included extended soak times. *Spent Minncare HD Disinfectant is acidic and requires normal neutralization as specified by your state and local regulations. A 1% solution of Minncare HD Disinfectant has a pH of 3.5.

Medical Device Minncare® HD Test Strips 510 (k) Peracetic Acid Test Strips Minncare HD Test Strips provide quick results with easy-to-read indicators with the assurance of accurate results associated with a 510(k) medical device. Use the Minncare HD 1% TS Test Strips as a pass/fail measurement for adequate concentration of sterilant after dilution. Then verify residual levels after rinse-out using Minncare HD Residual Test Strips. Minncare HD Peracetic Acid Test Strips represent the leading brand of test strip technology. Designed for hemodialysis applications, these test strips combine ease-of-use...